Hellothat parameters can use to optimize the roaming of a bridge wmic3205?. The current configuration is the following one, but the roamin he/she doesn't take place satisfactorily.interface Dot11Radio0 no ip address no ip route-cache no snmp trap lin...
Hello,I would like to know which it is the sequence of priority that a LAP takes to choose a WLC. I explain my case:I have a DHCP server with the option 43 enabled where I assign IP of WLC, but I also have enabled OTAP on WLC. What LAP will choose f...
Hello,I would like to know which it is the sequence of priority that a LAP takes to choose a WLC. I explain my case:I have a DHCP server with the option 43 enabled where I assign IP of WLC, but I also have enabled OTAP on WLC. What LAP will choose f...
Hello,I would like to know if some configuration exists so that these two cards work simultaneously. Since only HWIC works me. And when I remove HWIC it works me the NM-16ESW. I ignore if you can configure a stack among both cards, or other solution....
Hello,I would like to know if some command exists in a cisco 8540, for to see the power of transmission of the interfaces ATM OC-3.Also, I wanted to know the command or commands, to check that the redundancy of links ATM works correctly.Thank you
Hello again,much of the roaming problems have been solved by changing the antenna of the train. The operation has improved by 80%. But now there remains the problem we had before as well. We snmp monitoring by the state of the bridge, and how is it p...
Hello,The version of the bridges is 12.4.3JL1 (one of the last ones).The command "mobile station period 5 threshold 75" have also proven it and the roaming continues being similar of bad.The covering is good, but WGB doesn't associate to AP with the ...
The problem is that the stack between two model different from cards not you if it is possible. Since serious a stack with one HWIC-4ESW and NM-16ESW.Thanks
Hello,yesterday I upgrades my appliance ACS 1113 of the version 4.0.1.44 to the 4.1.4.13. (4.0.1.44 - 4.1.1.23 - 4.1.4.13).And in the process, my database corrupted. I have lost users and groups with EAP-FAST authentication.Now, I need CD 4.0.1.44 to...
