Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all. I would like to know... you can add a DX80 to CUCM 10.5; you can add to Cisco TelePresence Server the same endpoint. So, what is the difference?? you can add to **bleep** the telepresence endpoint but you will lose some kind of functions? is ...
Hi all!
I have the next problem:
CUCM 10.5 (remote - connection via MPLS 30Mbps).Partition Number: 3 (3 sites, 1 has the data center with CUCM installed on VMware)Active Load ID: sip88xx.10-2-2-16
In one location/partition, sometimes (no correlatio...
Hi, Many thanks for your answer. i would like to know what is neccesary to register a DX80 on a CUCM 10.5 because i usually see that MCU or telepresence server is integrated with CUCM.
Can i register DX80 on CUCM 10.5 only? what are the limitation...
Hi all!! many thanks for your support. The solution to this problem is tricky to find but easy to implement. The problem is the Device Security Profile in the phone configuration; you need to change it and for that you need to create a new one
System...
