Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it a typical practice to install a switch (2960) at sites to intergrate CIDS, KVM switches, routers, switches, etc. This would be installed behind a 2851 and provide a path for LAN traffic and isolate management. Is there a paper that details th...
I am trying to interconnect five sites that are on an existing fiber ring. Four of the sites, as a minimum, requires two (2) fiber WAN interfaces (call one East the other WEST. There is a final router that will require four (4) fiber WAN connection...
Is there a definitive document the provides the guidelines for determining the required bandwidth when using the ATA180 Series Phones. If IP service and VOIP are to be carried across a satellite link, maintaining the smallest bandwidth is a cost sav...
Are there any pitfalls to avoid connecting the two devices with fiber? I have a 100BASET conenction from the 2621 connected to a Media Concerter (100BASET to FL) this is a Transition Network SSETF1013-200. I have installed a WS-G5484 GBIC module in...
As we all know, pushing TCP through a satellite has many drawbacks. With enough money the latency can be reduced. Proxy caching of DNS and HTTP helps a great deal. I am trying to located some technical papers on the true way to design the part of a...
Thanks for the response. I have researched a little to determine that for the smaller sites I can use the 2851 with a HWIC-1GE-SFP card. I will use this as the East Connection. I will use one of the On board LAN ports for the West connection. See th...
