Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,this started all of a sudden - the tunnel goes till MM_SA_SETUP stage and then again starts back -Below is a part of the debug -ISAKMP (0): Checking ISAKMP transform 1 against priority 10 policyISAKMP: encryption 3DES-CBCISAKMP: hash MD5...
Hi,Users from a remote site using Oracle Web Client complain of slow speed over the FR link. The link is not congested. The speed was supposedly better over VPN --Changed the mtu settings on the ethernet (ip tcp adjust-mss 1380) of the 2600 to 1380 a...
Hi,Below is the PIX config statement :static(outside, inside) a.b.c.0 d.e.f.0 netmask 255.255.255.0 0 0This command translates a.b.c.1 to d.e.f.1 and so on - My question, should it not be random like a.b.c.x -> d.e.f.z and so on ?I was under the impr...
Hi,I have a setup with the SPA interface, however dont have the VPN Accelarator. I use 122-18.SXF5.bin , but also needed to download c7600-fpd-pkg.122-18.SXF5.pkg and put it in the boot directory to upgrade the firmware on the the SPA..HTH,Amar
This would largely depend upon how AS20 is configured beyond the routers that you are connected to..Assume, this is the setup on AS20...RTRA......RTRB ..RTRC...Where RTRC is the internal IBGP router for AS20 with links to RTRA and RTRB. IF RTRC h...
Routes from EBGP neighbors are redistributed automatically when you use IBGP, however if you use IGP then you have redistribute them..However, if you have only a stub network with all routes having a single connection to the internet then you can pro...
Hi Clay,You can try this too - lets say you have BGP neighbor with AS# 1000, then create a routemap and set community 3257:1000 to all the routes that you get from them.. This will help you to see only these routes from any BGP router in your network...
