Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I appear to have lost CDP info on the 4 Port Broadcom Card installed on my UCS-210 host. The 2 Intel Ports are okay and I was getting CDP before but for some reason it now states "Cisco Discovery Protocol is not available on this physical adapter"Any...
We have EM logout set at nine hours as a cluster wide parameter. However what I found extremely strange was a recent complaint that a user's call was terminated mid-conversation as their phone logged them out.Surely this should be a soft reset, not a...
I was hoping that some of you guys could confirm whether we can deploy VMware patches?We are running ESX 4.1.0 Build 260247 which I believe is probably what most people will have after a deployment. Our host hardware is the UCS 210 M2 servers and I w...
I am having difficulty blocking internal Directory Numbers from a particular set of phones.What I am trying to achieve is as follows:- I have a set of phones with DNs 5301 - 5310- I want to allow them to call each other, but I don't want them to rece...
CM 4.2.3 SR4bI'm using the external phone number mask setting on the DN configuration of a particular phone, and I've ensured that on my route patterns Use Calling Party's External Phone Number Mask is enabled.I have an IP phone range with extension ...
Hi Brian,CUCM 8.6.2a (1 Pub, 2 Subs, 2 TFTP) a restart is how I would imagine it would work but we have two active complaints that state a hard reset with calls dropped.Nick
A,I'm inclined to say then no you don't need DNS, because that is how I am working at the moment. But perhaps someone else can chime in with some advice, as like I said for me this is all a works in progress.Strangely what works for you doesn't work ...
Hi Abbas,Sorry for the delay in replying, I have been on sick leave. Did you manage to resolve this yet?System>Alert CentralAnd from there you should be able to see the Last Alert Raised. If it's in Red it hasn't been cleared (Acknowledged). Choose a...
1) DHCP and DNS aren't related in reference to this config2) After setting primary/secondary the system warns you that it will not be active until the domain name is set and then brings up the following warning: *** W A R N I N G ***Adding/deleti...
