Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiWe have 4 WS-C3560G-24TS running enterprise image running hsrp as our core switches. This week seemingly random once or twice a day ish all 4 switches are unresponsive, all packets appear to be dropped. Duration of 5 to 20 seconds. then traffic is...
Hi Sanity check please. Our Paris Office has just moved within the city and I'm having real trouble with France Telecom. I am running 2621XM with an NM-HDV2 with a VWIC-1E1 as an h.323 gateway to CCM7. The E1 circuit is up and clean. Outbound calls w...
Hi I have a c1861-B/K9 and it appears to have S/T BRI interfaces but in the USA we need U Interfaces. Is there a US version of this router or do I have to get external NT1's?ThanksRich
HiI'm looking at using a ASA 5500 to replace our aging pix. Other than normal firewall functionality, I want the unit to scan http content for malware, which I understand the Content Security Bundle provides. I also need to at least throttle an excep...
HiI am having problems with a T1 circuit (ESF, B8ZS and E&M Winkstart) and CallManager 4.2.controller T1 1/0 framing esf linecode b8zs ds0-group 0 timeslots 1-24 type e&m-wink-start!This is terminating on a 2621XM with a NM-HDV.I can successfully mak...
This is an ISDN30 config...Use show controller e1 to see if the E1 controller has alarm, if so you may have to change the framing to no-crc4!card type e1 1 1logging buffered 4096 debugging!clock timezone GMT 0clock summer-time BST recurring last Sun...
Hi JohnI did have a look but there are 686 bugs on this ios I tried a few filters but to no avail. This kit has been in place for 18 months with no issue. There are lot of other devices attached. So I am shooting in the dark a bit. For the time bein...
