About fab5freddy

fab5freddy · 09-18-2015

Hello everybody We have installed 2 N7K's & 8 N5K's installed in 1 DC room before.Today we notice that these are producing more cold air than is needed to cool the device or in order to have a good cold/hot aisle air flow.Is it possible to reduce pow...

fab5freddy · 09-09-2013

HelloI'm having trouble understanding what the issue is.I have 2 different networks, each with 2 pairs of N7K's (each using 2 VDC's) with multiple N5K's connected to all N7K's and both the VDC's.My set-up works fine for one network but not for the ot...

fab5freddy · 03-15-2013

HelloI'm having issues with a redundant/second power supply on a 7609 chassis.The first power supply has Manufacturing Assembly Number 341-0074-05, the second 341-0074-06.In an other chassis I've found that both power supplies have Manufacturing Asse...

fab5freddy · 11-30-2011

HelloI'm having troubles with applying an IP policy an a VRF interface.The router is configured with multiple VRF's eg A, B & CThis at both the WAN and the LAN side.Within VRF A I want to set a different next-hop for different source networks eg netw...

fab5freddy · 07-29-2010

HelloA client asked me to config different instances in dhcp.He gave me the following config:option 43 instance 3 ip 10.5.0.1option 43 instance 4 hex 5060option 43 instance 5 hex 5060option 43 instance 7 hex 06option 43 instance 8 hex 05option 43 ins...

fab5freddy · 09-21-2015

Hi JustinThank you for the support."show env detail" is not available in N7K or N5K"show env power in" is not available in N7K but I included a "show environment power detail" instead.I won't include the logs as we have a non-power related issue open...

fab5freddy · 09-09-2013

HelloBefore posting my question I had verified almost everything EXCEPT for fabricpath authentication!Seems that I made a mistake in copy/pasting my config.The fabric path authentication was missing on my port-channel used for peering.But thanks for...

fab5freddy · 09-09-2013

HiThank you for the input but this isn't the case in my set-up.The Po's are configured as P2P, see output:N7K11-ione# show run all | section "interface port-channel1" | grep medium medium p2p medium p2p medium p2pN7K12-ione# show run all | sectio...

fab5freddy · 03-12-2013

HelloI'm having this same problem.First idea was to replace the power supply.This has been done now but the problem remains.When the power supply is powered on, the fan LED goes green and the status LED goes black.But after a few seconds the fan LED...

fab5freddy · 07-30-2010

HiI also got the requets to configure option 43 for Aastra phones.Could somebody help me with the hex string?Following options have to be configured:Vendor Class = Aamadeus IP Phone):SIP port pbx: 5060SIP port phone: 5060SIP port backup PABX: 5060PA...

Member Since	‎01-04-2008 05:40 AM
Date Last Visited	‎03-13-2024 12:02 AM
Posts	22
Total Helpful Votes Received	5

User Statistics

User Activity

Nexus 5596&7010 fan speed

N7K/fabricpath/vPC peer link

Manufacturing Assembly Number

PBR on VRF interface

DHCP option 43 instance x

Hi JustinThank you for the

N7K/fabricpath/vPC peer link

N7K/fabricpath/vPC peer link

getting chasis alarm in 6509

Re: dhcp for voip phones