Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have successfully installed all the machines (expressway c & e version 8.2.2 , jabberguest 10 , callmanager 10.5 and presence 10.5 )I configured according to the specifications but I have always the same problem"Not found on Accelerator"the expres...
we are experiencing a problem on phone 78xx series when transfer a call.When the 7861 telephone transfers a call and the called party does not answer, can not resume the call on hold.I configure my sip profile in any particular way?
Hi all,we are experiencing some issues on a 8945 ip Phone. The user says that sometimes, people at the other end tell him that volume is very low and it's difficult to hear him. The user previously was using a 7941 and didn't have any problem, the is...
Hi all,is the attendant console enterprise 8.6 compatible with the CUCM 9.1?I found some compatibility matrix but they aren't very clear.Thank you very much, regardsDwe
Hi all,I have a CUCM 9.1 and an IM&Presence 9.1Everything worked fine, but suddenly I can't anymore synchronize the users from CUCM to CUP.On the CUP, in the CUCM Publisher settings page, the Sync Status says "AXL failure". But just under that, in th...
I have solved this problem by changing in jabber guest , call control and media , the ip of Expressway E -Turn serverI entered the ip pubblic (the nic 2 of expressway-E natted to this ip)Now the call it's ok but i have no audio and videoThe firewall...
Helloi have resolved this issue (call whit domain name no whit the ip pubblic) but i have a new issue Alway TURN ERROR when i connect trough the jabberguest clientI have a static nat in expressway E whit 2 nicI have create the trun setting in expres...
Hi all,we already tried several different firmwares (SCCP in our case), but no luck.We also tried downgrading to a quite old firmware (9-2-2-0) because we have another customer with plenty of 8945 phones with that firmware working perfectly. Again no...
