Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,We are running with a single ASA5550-BUN-K9 firewall without HA. Now, we have a new ASA5555-2SSD120-K9. Can we add this new ASA5555-2SSD120-K9 as a standby to ASA5550-BUN-K9 ??I know ASA5550-BUN-K9 will not support Next generation Firewall ser...
We are planning to enable IPv6 SSL VPN clients, Let me explain the current setupWe have Cisco ASA firewall used for SSL VPN and Cisco ACS for user authentication and RSA for two factor authentication.LAN Server are in IPv4 only..Requirement : Client ...
Hi,We have 3 layer LAN architecture, layer 1 of 6500(IP routing), layer 2 of 4500(L2 switch only), layer 3 of 2960(L2 Switch)In a Single (2960 and 4500) Switch Port Avaya IP phone and PC are connected. Now, the requirement is that, Qos need to be con...
ACS Primary and Secondary Scenario We have ACS Primary and Secondary architecture in our Datacenter, I have gone through the user guide and implementation guide, few things are not clear to me,•1. If primary ACS failed or unreachable, whether t...
Hi,We have 2 separate ACS 4.0 servers installed on windows 2003 server(2 separate location) Both these servers are Integrated with Cisco WLSE and Corporate AD.Now, we are planning for Migrating to ACS 5.4 on VmWare ESXi 5.1. And need to Integrated wi...
Hi Collin,Thanks for the reply.. Is there any way to use the new Firewall? like running VRRP/HSRP between them, so that if one firewall fails traffic can shift to other with minimum outage??These Firewalls will placed between to Routing devices, i.e ...
Hi Regis,ACS 4.0 to 5.x direct migration is not possible.. What is the role of current ACS 4.0?if it is used for devices AAA only, then manual migration is possible... Rgds,Sankar
Hi Scott,Yes, I gone through that, but have few doubts in that..In my case, users are external AD so, no need to migration right??Only the network devices, policies, location, identity stores, command set and shell are to be migrated right? Its menti...
