Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Did anyone has experience in installing CiscoWorks LMS on Sun machine running SPARC64 VI processors (e.g. M4000)? I couldn't find this processor in the supported list and not sure if it's compatible with CiscoWorks LMS or not.Regards,Rico
Hi,We've setup the VPDN (using L2TP) using RADIUS as AAA server. The authentication part has no problem for both LAC and LNS using two RADIUS servers.For example when the user login using abc@cisco.com, the LAC will authenticate to LAC radius server...
We're experimenting to configure a a PIX from outside using CSPM 3.0. Without NAT (Address hiding), we can successfully communicate and deploy config from CSPM 3.0 to PIX. But when we try to add NAT (Address Hiding), we found that the CSPM failed t...
But I couldn't find the processor SPARC64 VI supported in LMS 3.1's documentation (Installing and Getting Started With CiscoWorks LMS 3.1). Did I miss it somewhere?Or did you has tried to setup the LMS 3.1 on such processor?Thanks,Rico
Hi,If your WLAN enforced authentication before WLAN access using a centralized authentication server (like Cisco ACS 3.0). I think that you can just disable a whole group of users from authentication by re-configuring the authentication server.Rico.
Hi,The ACU is intelligent that if it detected the firmware of the adapter (e.g. PCM350) not latest enough, it will not display the checkbox option. I've tried before, once I updated the firmware of the adapter, the checkbox will be available.Rico.
For your 350 adapter, if you're using the latest version of firmware - 4.25.30and the latest version of ACU 5.02.005, you should be able to find the following new checkbox option:Periodically Scan For A Better Access Pointin your ACU > Edit Profile >...
