Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to find compatible 1Gb Copper SFPs for the 2960S-48FPD-L.
According to this -
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/hardware/installation/guide_stack/2960SHIG/HIGOVERV.html#wp1250224
The only SFPs supported for th...
I've got a cisco 871 connected via VPN to a cisco 5510 but cannot ping / access each others subnet. Site A - 192.168.50.x - Cisco ASA 5510 and Site B 192.168.100.x - Cisco 871. Running configuration below of the Cisco 871W. I have another 871W with a...
Hi - we have a client with a CME system and we're looking to get them upgraded.Cisco Unity Express Version 3.1About Cisco Unified CallManager ExpressOperating System: Cisco Internetwork Operating System. Cisco IOS (tm) C2800NMCisco IOS Software: C28...
We have a customer with a UC560. It's setup with Paging (ext 250) and Park lines (4 of them). Typically when an inbound call is received, the operator will PARK the call then hit the preconfigured PAGE button to inform whoever it is to pick up and wh...
Hi -Last week I had opened a TAC case in regards to phones randomly unregistering from our call manager system. The TAC engineer had ran a query / report from Real Time Monitoring Tool that showed the specific cases of all phones unregistering within...
I have changed the ACL but that traffic is for Guest wireless which isn't being used. Still a problem. Interface IP-Address OK? Method Status ProtocolFastEthernet0 unassigned YES unset up ...
Thanks Haitham.So flash is hot swappable even if it's not the compact flash slots on the front of routers that you see on UC models?I've got all files copied off the current flash onto the network. I'll put the flash card in and copy them back over. ...
Ok - so does this sound right...1. Copy all files off the existing flash.2. Copy the files to the new flash using a card reader.3. Put the new flash card in and make sure it boots on existing version.4. Copy the upgraded files to the flash / router.I...
Anas -Do you know how I can handle the flash card upgrade portion? Do I need to grab all the files off the existing flash card, have some type of card reader, and copy those files over?
Paolo,Do I need a card reader to get the files copied to the new flash card? And does it need to be formatted with a specific format?I have not done a CME upgrade but have performed other Unity / CM upgrades. I can't find any helpful documentation on...
