Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Best practice connecting 2 of the 1GB ports on 3925E to Nexus 3548 pair at the top of the rack. We currently have vPC's for each VLAN on the 3548 handling VLAN routing. We only have the one router (3925E) which acts as our MPLS WAN router and are l...
Good afternoon,Just pinging to see if anyone has had an issue applying the upgrade indicated above. We were told this will address a bug in SU1 that prvents monitoring/recording of conference calls.Thanks
Hi,Our budget just got cut in half--sign of the times! Can I connect a Nexus 5010 to a 6506 with 6724-SFP module using a 6GB etherchannel? The 6506 has a Sup 720 and will only be used to route the VLANs. All server swithing will be done through th...
Hey, We have a cisco 5010 that we want to connect to an HP C7000 enclosure using the HP 1/10GB-F Virtual connect Module. That module only supports the use of XFP transceiver or CX4. Can we go from the Cisco SFP to the HP XFP using 850nm fiber?
Can anyone tell me the benifit of using two dot1q subinterfaces when going from a 3560 switch to a 3725 router rather than using two different physical interfaces?Thanks.
That's what I thought so pardon this elementary question: I'll be creating 2 /30 subnets to participate in OSPF as such? 3925:Interface gi0/1description to 3548-A eth1/24ip address 192.168.2.1 255.255.255.252Interface gi0/2description to 3548-B eth1...
Hi Reza/Alan,In the 3925 we are using port-channel 2.109 as such:Interface port-channel 2.109encapsulation dot1q 109ip address 192.168.1.2 255.255.255.224end3548-Ainterface VLAN 109ip address 192.168.1.3/27ip ospf cost 2ip route ospf 1 area 0.0.0.035...
Hi Alan, Yes we have SVI's for each VLAN on each switch. For example:3548-A:interface vlan7ip address 172.16.7.2/24hsrp ver 2hsrp 7 preempt priority 120 ip 172.16.7.1 3548-Binterface vlan7ip address 172.16.7.3/24hsrp ver 2hsrp 7 preempt priority...
Hey,We use 4 ports off the Nexus 5010 to create an Etherchannel group to connect up to the 6506 with a 6748 and it works very well. The first 8 ports of the 5010 can be set to speed 1000 so we get a 4GB connection. If you already have the 720-10G, ...
