About k-renouard

k-renouard · 11-25-2009

No Phone status/BLF displayed in ARC Attendant Console (CUBACS) for extension mobility users.Call Manager 7.1(3)CUBACS/CUBAC 3.1.5I do see the phone status on the attendant console for fixed configuration phones but not the users with extension mobil...

k-renouard · 12-04-2007

If i have the extension number of User Device profile (And the UDP name). How can i find the SEP device name of the phone the user is logged into. Easy in CM4.x by doing a Route Plan Report and entering the Extension number, but in CM6 this only prov...

k-renouard · 05-04-2006

I've been asked by a customer to perform a detailed call flow analysys of their Cluster to prove the requirement for voicemail.What would be the best reports to run to attain this info?I think alot of calls go to Hunt groups if not answered on the DD...

k-renouard · 03-26-2013

Hi Guys,I have updates a CM 8.5 Cluster, and all worked ok.However i also have several clients with CM7.1.5 Business Edition (i.e. includes Unity Connection on the same box)i get the following logs at the end of the log when installing the patch[Cap...

k-renouard · 03-08-2013

Hi,I have a customer who is having the same issues with boot times. They have 64bit Windows 7 ssd machines and when the above is installed it adds 90 seconds to the boot up/login time. And are about to complete a company desktop refresh and this is ...

k-renouard · 05-06-2011

Try changing the destination-pattern to ....T or a more specific plan on dial-peer voice 102 voip and dial-peer voice 103 voip as .... is the first EXACT match. Those 4 digits are then used, but then the H323 gateway uses dial-peer 2 and sends the 4 ...

k-renouard · 11-15-2009

I have the same/or similar issue, has this been resolved.If i call the Queue internally the Attendant sees the call and can work with it. If the call originates from the PSTN, hits a Translation profile to route the call to the same Queue, the Attend...

k-renouard · 11-03-2009

I've just come onto the netpro forum as i also have a customer with the same issue. They were using verion 7.0 of CIPC on CallMAnager 4.1(3), he says he has also tried version 2.1 of CIPC.Services works fine from other IP Phones and like you say can ...

Member Since	‎01-05-2005 04:51 AM
Date Last Visited	‎05-06-2022 12:04 AM
Posts	15

User Statistics

User Activity

No Phone status/BLF displayed in ARC Console (CUBACS) for extension mobility users

How can i find the Phone Device Name in CM6?

Best CDR Analysis reports for...

DST 1 week early on 7940s

Cisco MSI Slows Windows Boot Time

Re: Issues with outgoing FAX on H323 gateway

Re: Business Attendant Console: No calls in queue

Re: Blank CIPC Service page