Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm about to open a case with Cisco and the device maker but figured I'd try the collective mind here. I've got some non-Cisco devices using POE on various Cisco switches and they work just fine. (TASCAM VS-R265 4K Streamer/Recorder) I'm using them o...
I'm installing CM6.1 and have enabled the importing of users from Active Directory. This works fine as far as it goes. In AD we set the full 10 digit phone number in the telephonenumber field and we put the five digit extension in the ipphone field. ...
We are running Oracle financial applications and need to provide access to users on the Internet. We can do that fine except for people behind tightly controlled firewalls that only allow port 80 and 443. Oracle insist it has to run it's apps using S...
I'm getting ready to deploy some 7920's and want to make sure I've got some decent security. What I'd like to do is combine mac address security with a userid/password unique to the phone. (or I could live with a common one for all phones but I don't...
I've got a 3660 connected to a Nortel Option 11c with a PRI. The 3660 is controlled by CallManager 4.01 using MGCP. We are using five digit extensions to make calls between CM and the PBX. Calls between the two are working fine.Problem is the PBX is ...
Just tried 17.12.5 and 17.9.6 with the same results. I'm downloading 17.9.3 because that is working on a C9300L-48P and will try 17.17.1 just for giggles. Sounds like I'm opening a TAC case tomorrow.
I just tried 17.12.5 then downgraded to 17.9.6 and neither worked. I'm going to try 17.9.3 since that is running on a working 9300L-48P. Just for fun I'm downloading 17.17.1 right now and crossing my fingers. I don't expect any difference so probably...
Interesting thing is it appears to use LLDP from the debugs and even if I disable it I still see messages in the traces. Otherwise there isn't any LLDP traffic on the port. Anyway, LLDP isn't the problem here. Like I said I have to set the 2-event op...
Hi Lucien,I have a pair of new 5548's running 5.0(2)N2(1). I am trying to use Dell R810 servers with Qlogic QLE8150 CNA's. Under Windows 2008R2 I can't seem to pass a packet larger than 251 bytes through the switch from a 1Gb device to a 10Gb devices...
