I have a stack of 3 WS-C2960X-48FPD-L switches.   Currently running 15.2(2)E4.   The switch priority is set so that Switch 3 will be come the master if Switch 1 Fails. Show switch output *1 Master 005f.86xx.xxxz 15 4 Ready 2 Member 005f.86fxx.xxxy 11 4 Ready 3 Member 005f.86xx.xxxx 13 4 Ready   Switch 1 & 3 have Uplinks in LACP Link Agg to core switch   When Switch 1 is powered off, The devices on switch 2 & 3 continue to function as expected, but I can not manage the stack via the management IP Address.   Unfortunately I could not get a console cable on switch 3 or 2 at that time of the incident.   I am looking to upgrade to tha latest stable version of code, but was wondering if anyone else has run into this and if this possibly a result of Bug - CSCuz18016 - Master switch stuck at Master Re-Init state after master switchover.   After Switch 1 powered on, had to reboot other two switches to get management back.   Thank you ... View more

I just installed Security Manager 4.9, I had also tried 4.8, same problem.  After I have completed the install and applied the license file, I try to add device to Configuration Management.  When I click file, then add device - Nothing happens. ... View more

Can I do either of the following with a Cisco 5505? Limit Internet bandwidth used by the tunnel so it doesn’t consume our entire Internet bandwidth of 10Mbps at any given time Limit Internet bandwidth used by any single host for same reason I have a site-to-site VPN configured to another Cisco asa. Thank you ... View more

I am trying to apply patch 5.2.0.26.10 to a newly installed Cisco Secure ACS Server.  When I run the acs patch install command it fails. Here is my repos config: repository Update   url s ftp://10.134.52.115/   user id4sftp password removed sh repo Update - output 5-2-0-26-10.tar.gpg Command Execution: acs patch install 5-2-0-26-10.tar.gpg repository Update Response: Failed to copy file '5-2-0-26-10.tar.gpg' from repository Update (Error -306) % Error: patch install 5-2-0-26-10.tar.gpg from repository Update - transfer failed (code 1) Debugs:  (debug transfer 7, debug copy 7) Response 6 [20989]: transfer: cars_xfer.c[47] [admin]: sftp copy in of 5-2-0-26-10.tar.gpg requested 6 [20989]: transfer: cars_xfer_util.c[480] [admin]: resolved server to 10.134.52.115 7 [20989]: transfer: cars_xfer_util.c[487] [admin]: copying /home/id4sftp/5-2-0-26-10.tar.gpg from remote server: 10.134.52.115 7 [20990]: transfer: sftp_copy.c[70] [daemon]: Executing SFTP command: /usr/bin/scp -o StrictHostKeyChecking=no id4sftp@10.134.52.115:/home/id4sftp/5-2-0-26-10.tar.gpg /opt/CSCOacs/patches/5-2-0-26-10.tar.gpg 3 [20989]: transfer: sftp_copy.c[137] [admin]: sftp_copy ERROR: timeout! Failed to copy file '5-2-0-26-10.tar.gpg' from repository Update (Error -306) % Error: patch install 5-2-0-26-10.tar.gpg from repository Update - transfer failed (code 1) 3 [20989]: transfer: sftp_copy.c[230] [admin]: sftp_copy ERROR: command execution failed Thank you very much for your assistance David ... View more