Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About jyoopro4ia
Stats
Member since
03-31-2009
80
Posts
15
Helpful
0
Solutions
03-14-2014
11:15 AM
We ordered the BE6000 10x recently and the UCS C220 BE6000 box just came today. When it was time to bring the CUCM/CUC VMs up, I noticed that the media that was on the datastore1 only contained 9.1 software along with 9.1 OVA files. I understand the OVA files for 10 can be downloaded from Cisco.com but where can I get the media? Should the 10x BE6000 sku come with 10x media & OVA files? or is this done through a different method? Should I install 9.1 using the included isos and upg to 10x? Thanks in advance -
... View more
- Tags:
- be6000
Labels:
Created by
jyoopro4ia
in IP Telephony and Phones
in IP Telephony and Phones
09-11-2013
07:44 AM
09-11-2013
07:44 AM
I have a 9971 phone I've successfully registered on CME 9.1. I'm trying to enable additional soft keys such as meet-me, Conf, and park on the 9971 however I'm running into some issues. I've read the guide at http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesoftk.html#wp1011897 and tried to create a voiec register template 1 as below - voice register template 1 softkeys seized Redial Endcall Cfwdall Meetme softkeys connected Confrn Endcall Hold Park Trnsfer camera video and applied this on the register pool of the 9971 as below - voice register pool 2 id mac xxxx.xxxx.xxxx session-transport tcp type 9971 number 1 dn 2 template 1 dtmf-relay rtp-nte username user1 password 123456 codec g711ulaw camera video however when I pick up the handset, I do not see any of the options I enabled above - " Redial Endcall Cfwdall Meetme" Any suggestions will be appreciated. Thank you.
... View more
Labels:
09-10-2013
08:56 AM
Thanks for the response. The problem is that I'm coming from CME background and am not too familiar with doing this on a standalone CUCM or BE6K. Any info or links to documents will be appreciated.
... View more
09-09-2013
11:58 AM
I am familiar with how to get a 7945/65 working remotely using SSL VPN & ASA on a CME. I'm trying to put a BOM together for a BE 6000 system with remote VPN phones and I was wondering if BE 6000 handles this similarly? Do I terminate the phones' vpn into the ASA or the VG (2921 in my case)? Are there any documentation on this? Thank you.
... View more
Labels:
09-05-2013
01:35 PM
Does CME currently support DX650? I searched for some info and the only thing I was able to find was a documentation that only mentions certain functionality will not work when DX650 is configured under CME - Cisco Desktop Collaboration Experience and Cisco Unified Communications Manager Express interaction When the Cisco Desktop Collaboration Experience works with the Cisco Unified Communications Manager Express (Unified CME), the phones must go into CME mode. When a user invokes the conference feature, the tag allows the phone to use either a local or network hardware conference bridge. The Cisco Desktop Collaboration Experience DX600 series phones do not support the following actions in Unified CME mode: Transfer Supported only in the connected call transfer scenario. Conference Supported only in the connected call transfer scenario. Join Supported using the Conference button. Hold Supported using the Hold button. Barge Not supported. Direct Transfer Not supported. Select Not supported. The users cannot create conference and transfer calls across different lines. http://www.cisco.com/en/US/docs/voice_ip_comm/cdce/dx600/admin/10_0_1/english/DX60_BK_C989350E_00_cisco-desktop-collaboration-experience-dx600_chapter_011.html It doesn't look like latest CME 10.0 supports this model. Can anyone confirm? Thanks!
... View more
Labels:
Created by
jyoopro4ia
in Small Business Switches
in Small Business Switches
02-12-2013
11:56 AM
02-12-2013
11:56 AM
I checked the software ver on both switches and they are running 1.1.1.8. It looks like I should try getting them up to 1.1.2.0 to see if that addresses this problem!
... View more
Created by
jyoopro4ia
in Small Business Switches
in Small Business Switches
02-12-2013
11:29 AM
02-12-2013
11:29 AM
Any updates to this op? I also have 2 clients that are experiencing this issue. One experiences this more than the other. This particular client's SF 300 switch requires rebooting every few months. When the problem occurs, they experience no connectivity on some of the switch ports. Reboot fixes this immediately. I think I've had to reboot their switch about 4 times last year. Another client recently experienced this as well. All of a sudden, few of their phones were not registering to the UC320 system and reboot resolved this issue.
... View more
10-08-2012
01:15 PM
I'm having issue registering a 9971 phone on a UC520 running CME 8.6 Here are the relevant configs - voice register global mode cme source-address 10.1.1.1 port 5060 max-dn 224 max-pool 56 load 9971 sip9971.9-2-2 load 7971 term71.default authenticate register authenticate realm all timezone 13 hold-alert voicemail 400 tftp-path flash: create profile sync 0467524178137401 camera video voice register dn 2 number 701 name Video Phone no-reg label Video Phone voice register pool 2 id mac 8875.xxxx.xxxx session-transport tcp type 9971 number 1 dn 2 dtmf-relay rtp-nte username video1 password 123456 codec g711ulaw ------------------------------------------------------------------------- When I bootup my phone, it simply displays "Phone Not Registered". If I manually set an Alternate TFTP and specify 10.1.1.1, it requires me to enter 123456 to enter Administrator Settings and I also see Extension Mobility and My Phone Apps under settings which is an indication that the phone system is talking to the phone. Here's my debug tftp events output - Oct 8 20:13:46.781: TFTP: Looking for CTLSEP887556511C12.tlv Oct 8 20:13:46.873: TFTP: Looking for ITLSEP887556511C12.tlv Oct 8 20:13:46.961: TFTP: Looking for ITLFile.tlv Oct 8 20:13:47.089: TFTP: Looking for SEP887556511C12.cnf.xml Oct 8 20:13:47.089: TFTP: Opened flash:/SEP887556511C12.cnf.xml, fd 1, size 4338 for process 336 Oct 8 20:13:47.117: TFTP: Finished flash:/SEP887556511C12.cnf.xml, time 00:00:00 for process 336 Oct 8 20:13:49.201: TFTP: Looking for featurePolicyDefault.xml Oct 8 20:13:49.205: TFTP: Opened flash:/featurePolicyDefault.xml, fd 1, size 825 for process 336 Oct 8 20:13:49.213: TFTP: Finished flash:/featurePolicyDefault.xml, time 00:00:00 for process 336 Oct 8 20:13:49.477: TFTP: Looking for English_United_States/gd-sip.jar Oct 8 20:13:49.577: TFTP: Looking for United_States/g4-tones.xml When I look at the status messages on the phone - Does not find United_States/g4-tones.xml Does not find English_United_States/gd-sip.jar Gets an error updating locale Anyone have any ideas / suggestions? Thanks!
... View more
Labels:
10-05-2012
11:54 AM
Bongsu, Are you saying SIP phones such as 9971 do not depend on those 2 lines for it to work? So I can remove the two bind lines and get a 9971 or Iphone working?
... View more
10-05-2012
11:27 AM
As some of you may know, software pack UC520 8.6 adds 2 bind lines in the config - voice service voip sip bind media source-interface Vlan100 bind control source-interface Vlan100 These above lines are required to register SIP based phones such as 9971 or Iphones. Unfortunately having these lines in the config also causes MWI to stop working. What is a standard setup/config to have both SIP phones registered and MWI working simultaneous? Thanks in advance
... View more
Labels:
08-01-2012
02:04 PM
This is what I have currently - voice service voip ip address trusted list ipv4 0.0.0.0 0.0.0.0 allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip sip registrar server expires max 600 min 60 no update-callerid I removed the bind statements to get my MWI working again. Does Jabber require these bind statements? I believe CCA added the bind statements in when I added a Jabber client.
... View more
08-01-2012
08:01 AM
John, 1. Internet Calling Device ID is SEP plus the wireless MAC of the iPhone. You can locate the wireless MAC of the iPhone under General -> About -> Wi-Fi Address TFTP Server is 10.1.1.1 Use Authentication is on Username is 123456 and the password is 123456 Do you want to confirm the above settings for my Jabber client? That's exactly how it's setup currently. 2. Voicemail Username is 123456 Password is 123456 Server is 10.1.10.1 No port is defined Are you saying I should be able to log into CUE gui at 10.1.10.1 using 123456 / 123456?
... View more
07-31-2012
02:01 PM
yes it looked like it was trying to register on my first attempt after making the config changes but I cannot replicate it anymore. I changed the username & pw to 6 chars (123456 / 123456) and am still getting invalid credentials error. here is the debug output Jul 31 21:00:22.154: TFTP: Looking for CTLFile.tlv Jul 31 21:00:22.182: TFTP: Looking for SEP8C5877646102.cnf.xml Jul 31 21:00:22.182: TFTP: Opened flash:/SEP8C5877646102.cnf.xml, fd 0, size 3425 for process 269 Jul 31 21:00:22.250: TFTP: Finished flash:/SEP8C5877646102.cnf.xml, time 00:00:00 for process 269 Jul 31 21:00:22.310: TFTP: Looking for CUPC/AppDialRules.xml Jul 31 21:00:22.350: TFTP: Looking for CUPC/DirLookupDialRules.xml
... View more
07-31-2012
01:31 PM
John, It looks like I'm getting further... I checked telephony services and I did not see the following lines in the config - (the system dates back when UC520 was first released) cnf-file location: flash: I added the above line. Also, I removed "authenticate realm domain.com" from voice register global as well. I recreated cnf and voice register profile. When I tried initially to register Jabber, the debugs looked good and showed the phone registered, however it was not able to create a dial-peer due to memory issues (my other discussion that you were assisting me with - https://supportforums.cisco.com/message/3693878#3693878). Too bad I didn't get to copy this debug output. Register attempts after the first one looks only like this - Jul 31 20:29:32.967: TFTP: Looking for CTLFile.tlv Jul 31 20:29:32.995: TFTP: Looking for SEP8C5877646102.cnf.xml Jul 31 20:29:32.995: TFTP: Opened flash:/SEP8C5877646102.cnf.xml, fd 0, size 3416 for process 269 Jul 31 20:29:33.059: TFTP: Finished flash:/SEP8C5877646102.cnf.xml, time 00:00:00 for process 269 Jul 31 20:29:33.119: TFTP: Looking for CUPC/AppDialRules.xml Jul 31 20:29:33.151: TFTP: Looking for CUPC/DirLookupDialRules.xml Although I am still unsuccessful in getting Iphone Jabber registered, I feel like I'm a step closer to resolution.
... View more
03-14-2014
We ordered the BE6000 10x recently and the UCS C220 BE6000 box just came
today. When it was time to ...
Created by
jyoopro4ia
in IP Telephony and Phones
09-11-2013
09-11-2013
I have a 9971 phone I've successfully registered on CME 9.1. I'm trying
to enable additional soft ke...
09-10-2013
Thanks for the response. The problem is that I'm coming from CME
background and am not too familiar ...
09-09-2013
I am familiar with how to get a 7945/65 working remotely using SSL VPN &
ASA on a CME. I'm trying to...
09-05-2013
Does CME currently support DX650? I searched for some info and the only
thing I was able to find was...
03-28-2013
Amit,It looks like we need to renew our service contract. What is the
correct part # of the service ...
03-28-2013
Thanks for the quick response Amit. I checked the link and my Shipped SW
TC5.1.3 is also the only op...
03-28-2013
I see that for a major software upgrade such as TC5 to TC6 requires a
release key. I am having diffi...
Created by
jyoopro4ia
in Small Business Switches
02-12-2013
02-12-2013
I checked the software ver on both switches and they are running
1.1.1.8. It looks like I should try...
Created by
jyoopro4ia
in Small Business Switches
02-12-2013
02-12-2013
Any updates to this op?I also have 2 clients that are experiencing this
issue. One experiences this ...
10-08-2012
I'm having issue registering a 9971 phone on a UC520 running CME 8.6Here
are the relevant configs -v...
10-05-2012
Bongsu,Are you saying SIP phones such as 9971 do not depend on those 2
lines for it to work? So I ca...
10-05-2012
As some of you may know, software pack UC520 8.6 adds 2 bind lines in
the config -voice service voip...
Public Statistics
| Date Registered | 03-31-2009 07:02 AM |
| Date Last Visited | 08-18-2017 03:56 AM |
| Total Messages Posted | 80 |
| Total Helpful Votes Received | 15 |
