Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Product Title: Developing Applications using Cisco Core Platforms and APIs (DEVCOR) v1.0Product Part Number: ELT-DEVCOR-V1Tried different browsers (Chrome and Firefox) and different computer.See attached - Please assist.
Hi, In this link this is setup and Switch ports are set to vlan access 10https://integratingit.wordpress.com/2018/05/07/configuring-cisco-ise-dynamic-vlan-assignment/ Is this VLAN 10 configuration required to allow the user to login to the domain con...
Hi,Do I need to configure anything on the replacement switch if it is the same model and running same IOS version?I ran "show switch" on it and it stats that it is Switch 5 so not sure how it got this right as the faulty Switch was indeed member 5. S...
Hi, aaa authentication for ssh/serial/console is set to tacacs and then localaaa authorization command set to tacacs and then localaaa authorization exec auth-server auto-enableaaa accounting enable/serial/ssh set to tacacs-server When logging in via...
Hi, AWS require 2 peers to be setup for redundancy, is this not possible to achieve with ikev2? Should Phase 1 and Phase 2 encryption/hashing/DF Group match? Seeing no return pkts decaps=0 so wonder if this has to do with Phase 1 picker lower securit...
Agreed think it should be as follows: All computer accounts are already member of "Domain Computers" Group so we need to add these to another specific group to be referenced by ISE.I add the Computer AD Group to ISE from External Identity Sources/Act...
Ok that VLAN 10 thought it was the first network the machine gets in and the 802.1x follows.Now I understand that 802.1x is first and layer 2 so next step is understanding how I can either do: Machine Authentication - getting ISE to check the AD grou...
ok so that VLAN 10 (just to keep with the same example) is important (probably mandatory for this setup) as it is the VLAN that allows the user to authenticate (are we saying this VLAN 10 should be allowed to talk to DC Server?) which as a result dyn...
Hi BB, Replacement Switch already shows the following out of the box when show switch command is entered: *5 Active xxxx.xxxx.xxxxx 11 Vxx Ready This matches the faulty switch in terms of Member Number and Priority. Current Master and Slave h...
