Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We are migrating some access from Decnis into TCP/IP at X.25 links and we have XOT configured at our router.The point is that for 4 of 5 accesses this is working fine but at one of them not, and the following log is shown:Feb 3 14:46:51.138 MET: F...
I need to intall 04 Aps in an area where all of them have contact. I now know that the best practice is to use the three channels combination, but what would be the best way to do it? How could I use the 4 APs considering that two of them will be in ...
I have some printers that when show problem and we have to replace, the MAC-to-IP mapping remains at core and even when deleting manually it doens't work. If we use a different IP address at same network it works perfectly. After a lot of time (belie...
we have solvet this by creating another connection with the router, but it was very nice to be back to routing basics and remember this. sometimes we look for super complicated problems and the answer is close and basics.Thanks for the help,Luiz
Hi My friends,The problem is the following:When set the secondary address at VLAN 01, at 3750 switch it works from other connected Vlans locally at this switch, but from remote sites coming through the WAN not, not even from ISP router.But, at same s...
Hi Sakella,You've really got the point because we found out that historically used the window size as 3 but at SP it was set as 2.For other 3 suppliers it never became a serious problem or even was noted because when this happens, communications was ...
Hi,Thanks for your feedback about the power levels, do you know where can I find the material about it? And about the antenna we haven't purchased no external antennas, so I believe that will have to deal with power level.Rds,Alexandre
