About Damon Williams

Damon Williams · 11-01-2016

To save time, I was wondering how can I upload a running configuration via TFTP to flash on a Cisco CSS11503. The CSS11503 is offline at my Data Center. I want to manually configure a private on it and configure a static IP on my laptop so I can TFTP...

Damon Williams · 11-01-2016

To save time, I was wondering how can I upload a running configuration via TFTP to flash on a Cisco CSS11503. The CSS11503 is not on the network. I want to manually configure a private on it and configure a static IP on my laptop so I can TFTP the r...

Damon Williams · 07-06-2016

Are the 10GB fiber uplinks on the Cat 4507R+E compatible with the 1GB fiber uplinks on the Catalyst 2960S switch? Both switches are using SFP mini-Gbic transceivers. Thanks, Damon

Damon Williams · 06-14-2016

I have an unique issue after configuring a 3650 switch setup as an access Layer 2 switch. For some odd reason nodes (PCs, laptops) are able to receive their DHCP IP info on ports 2-24 with no issue but not on ports 25-48. The trunk port is on port 1...

Damon Williams · 11-03-2016

Thanks Kanwal, Now how the next step for me is where to configure an IP address on the CSS. Do I configure the management interface to do TFTP the running config over or do I configure one of the 4 interfaces on the CSS? Which is preferred in this c...

Damon Williams · 11-01-2016

Thanks Reza, this worked and helped me.

Damon Williams · 07-06-2016

Hi Philip, In case this issue may occur again, the 3650 switch had an issue with one of it's ASICs that has been documented for the C3850-48P switch. Unfortunately there was no work around for the C3650-48P except having Cisco replace the switch via...

Damon Williams · 06-15-2016

Yep I updated the software version. I'm still having the same issue. This is the only access layer 2 switch not directly connected to the core switch. There's a trunk going to an access switch to get to the core switch. Apparently this is the only s...

Damon Williams · 06-15-2016

Hi John, I removed the commands under ports 25-48 and reapplied them. The issue still occurred

Member Since	‎04-02-2013 05:13 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	10

User Statistics

User Activity

How can I TFTP a running config over to an offline CSS11503

How can I TFTP a running config over to an offline CSS11503

Catalyst 4507 R+E Sup 8 10GB fiber uplinks compatible with 1GB fiber uplinks on Cat 2960S

Catalyst WS-C3650-48PD switch not passing DHCP info to PCs on ports 24-48

Thanks Kanwal,

Thanks Reza, this worked and

Hi Philip,

Yep I updated the software

Hi John,