Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,I have a bit of an issues. I've got two routers on my bench that I building models for a FlexVPN deployment a couple of customers. Some customer are still running 2900 and others running 4000; we are in the process to replace these older mach...
I have a CME 10.5 environment with 7945/65/45 and 6945 phones. I am having a certificate issue with one of the 7965 phones. This phone worked fine up until a little over a week ago. It now fails to register with the following certificate error:
006...
I am working on a project for a customer that has a 1841 ISR with a HWIC-AP-AG-B wireless card installed. They also have an autonomous AIR-CAP3502I-A-K9 that will need to attach to one of the Ethernet ports on the router. Ideally both APs would use t...
I have an Aironet 1252 that is acting as a root bridge with wireless clients; there are a total of 2 wireless SSIDs and 1 infrastructure SSID on the AP with 4 VLANs passing through it. There is a single Aironet 1142 that is connecting to the infrastr...
I've never been a fan of using secondary addresses on interfaces; it makes it complicated if you need to source traffic on the LAN that needs to go out through an IP other than the IP assigned to the outside interface. As Paul noted as long as your p...
The 1921 does not have a HTML interface; it, like other routers in the series, requires configuration at the command line interface. The 1921 does support VLANs but not in the way you want them to work. You can create trunk interfaces that would pass...
You have to have a private key in order to us SSH; the simple way to do this is issue the ip http secure-server command. If you want to be a little more specific with a Self-Signed SSL you can follow the instructions listed here:https://www.ciscozine...
Here is a very good guide on how to create multiple SSIDs on a Cisco AP. This guide does not go into the IP infrastructure needed for DHCP but it will cover switch port and AP configuration. Cheers,Sam
