Hi, We are running DHCP Service on the L3 Switch and now we are configuring a new WDS server in our network in one VLAN and we want to make use of that to boot any system irrespective of VLAN's. We configured IP helper address as the WDS Server and...

Hi, We are running DHCP Service on the L3 Switch and now we are configuring a new WDS server in our network in one VLAN and we want to make use of that to boot any system irrespective of VLAN's. We configured IP helper address as the WDS Server and...

Hi All, We are planning to implement QoS on our network to increase the bandwidth for Voice traffic. So we have Cisco 3560 switch and a router where the WAN link is terminated. 1 ) If i trust the access port / cisco phone connected port by using Co...

Hi All, We are planning to implement QoS on our network to increase the bandwidth for Voice traffic. So we have Cisco 3560 switch and a router where the WAN link is terminated. 1 ) If i trust the access port / cisco phone connected port by using Co...

Hi All, We are planning to do N+1 redundancy For anchoring the Guest access when the primary Anchor controller fails. I did anchoring to all the DMZ ( External ) Controllers from my Foreign controller. When i configured under SSID - Mobility Ancho...