Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We have an ASA with AnyConnect Essentials and Mobile license.Based on Cisco documentation, Premium licensing is necessary to achieve Always-On connection on mobile devices (ie. Iphone).However, there is also an option for "on-demand" VPN which I t...
Hi,I've installed a WLC 5508 with 4 Ggps LAC trunk to a 3750 gig switch. I have the 1142N-K9 access point plugged in Gig also.I'm using all the best practice for a good Wireless N network (http://www.cisco.com/en/US/products/ps6366/products_tech_not...
Hi,We are using Cisco 3750 power over ethernet switch with Nortel 1140E Ip phones.Is there any way the the 3750 could adjust power consumption automatically via "lldp med-tlv-select power-management" ?My 1140E is set with LLDP, and if I do a "show LL...
Hi,We have a NAC OOB, Real-Ip Layer2 setup and the new option "Logoff Clean Access Agent users from network on their machine logoff or shutdown" does not apply when using OOB mode (which is annoying). Anybody found a way to make sure that when a use...
Hi all,I have setup a lab with a OOB VGW setup. I have setup an authentication VLAN on the untrust interface of my CAS on vlan 120 which is mapped to internal production vlan 20 when assesment is done. So far everything works fine except the defaul...
Hi Alex,
It's been two years since your post. Did you go with the 1532i finally ? Is it working over 5 or 2.4 Ghz. What's the max speed ?
I'm looking for a similar scenario, only difference is the distance at approx 400 feet.
Regards,
Dominic
Hello GiuseppeThanks a lot for the information. Does that mean that I have to enable ip routing on the switch, even if I don't need it ? Anybody found another way to make it work ?Dominic
Yes it's possible.I am using one tunnel-group and many group-policy that matches some Windows Group in AD. So all I have to do is assign a particular windows user to a group to give him/her VPN access.First: Specify a ldap-attribute-map under your a...
Use the command "vpn-filter value YOUR-ACL-NAME" under your group-policy. Then create the Access-list with the ip/ports you want them to access.For example:group-policy TEST internalgroup-policy TEST attributes dns-server value 10.1.1.60 vpn-tunnel-p...
