Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey All-
I have a backup route with a static route for a network. Happens to be a nssa ospf area 4. I want to advertise it to my core network.I am redistributing this static into OSPF area 0. Problem is that routing take this E2 path (metric of 10) a...
We have the asa 5510 v 8.2- We are now migrating to the 5515- I had a few questions in hopes someone out there can help me understand this:We have a 5515 Sec Plus firewall- Is this the same as the 5515-X? I see nothing in the sh ver that indicates th...
I have deployed a Mitel 3300 MXE at our HQ. Office and Have cisco CUCME on 2901 routers at a couple remote sites. We have a Qsig trunk between the HQ. Site Voice GW router (2811) and the Mitel.Everything is working except to MWI on the Cisco 7960 pho...
HI all- I need to set up a L2 llink between my LAN and this 1921 router. I though IRB would do it but its not working yet. Looking for some ideas. Here is the topology- I dont want to see another hop on this 1921 rtr so I hope I can just trunk it or ...
My company is going to be testing our DRP this weekend and part of this test will simulate access to my server room being cut off. I have a meshed LAN Backbone where I have the vlans propagated everywhere outside of the server room via VTP. This is a...
Thanks. I was merely looking for a explanation of the old global command as I need to fully understand all the Natting that has to happen in the new firewall. Im a new employee walking into this and I see what I think are descrepancies that noone her...
Here is teh router config:sh run!!bridge irb!! !!interface Embedded-Service-Engine0/0 no ip address shutdown!interface GigabitEthernet0/0 description Connection to Inside_ASA ip address 10.116.1.3 255.255.255.0 duplex auto speed auto!interfa...
Ill get to the Internet and MPLS in time, right now I need to solve the problem on my LAN reching the L3 interface on the router form the LAN behind the 3750
well I tried to keep it simple and in the context of what im doing. But since you asked, We have DRP site elsewhere connected to the MPLS network where we have identified critical systems that will be made available outside the normal server room env...
