class-map match-any police_traffic_rtr-01 match access-group name police_rtr-01 ip access-list extended police_rtr-01 permit ip host 10.20.20.100 10.10.10.0 0.0.0.255 permit ip host 192.168.5.76 10.10.10.0 0.0.0.255 permit ip host 192.168.1.79 10.10....

The following configuration is on two routers running version 15 IOS do not have the same group name in each device nor a configuration in the standby group with a name at all and yet they appear to know about each other from a helper address point o...

I have a solution where I have two switches connected together using area 0 and each has a conenction to area 2.there is no common area 2 interface between my switches.One of the switches is the active device in a HSRP pair and all the traffic arrive...

Can someone help with changing the IOS used in a ASR1002 from ipbase to  advipservices, I need to run BFDSo far I have copied asr1000rp1-advipservicesk9.02.06.02.122-33.XNF2.bin to the flash memory and treid simply to change the boot system statement...

Hi All Can anyone help me with a suitable RMON configuration fro monitoring crc errors and raising an alarm if the CRC error rate goes above 5 errors in 15 minutes?