Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,Thank you for taking the time to read this. We are having users who are able to connect to our client AnyConnect VPN, but are unable to pass traffic. It appears to be random. We have had several users reboot, restart, and reinstall their cl...
All,I have a WS-C2960C-12PC-L which I am trying to access. The console settings have been changed from the default and the configuration is unknown as the switch used to be a test switch. I am unable to determine any usable information via CDP Neighb...
Question for those in the know as I have not been able to confirm this. The course work covers AutoAP, LW AP's with a WLC, and touches other hardware types as well. My understanding is the config work involves the switch setup, both types of APs, APs...
I am looking for some assistance with the following setup for BGP with the following conditions:Client has two 2900 routers, each connecting to a seperate ISPClient has a Sonic Firewall with a link to each routerClient owns their own /24 block of pub...
Hello all,I have a client that currently has two 4 port FXS cards, VPN Module, and a T1 and the client would like to add 4 more ports. I do not believe the router can support it, but want to be sure. Here is the show version and the slots al lthe car...
Due to the high impact of this problem we upgraded to 9.4(1) which is presenting it's own problems as well, but they are at least manageable. We attempted multiple versions of the AnyConnect client and no luck. It seemed there was no reliable combo. ...
As I stated, already did that twice with different terminal programs and using both the RJ-45 and USB ports on the device, every setting from 300 to 115200 and few of the higher ones using Teraterm. I've also tried different data, parity, stop, and f...
That is what i'm looking for. The ultimate goal is CCNP level work for site surveys, then moving on to full CCNP. We are regularly deploying WLC's base in a colo and serving multiple locations as well as locations with 10+ AP's and VoIP wireless phon...
Blau,I appreicate the response! I am going to test the configs out, that looks very well put together! Thank you for including the Sonic configurations as well. I've never worked with them so that is a big help.
