Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I kindly ask to advice the best way to configure the following chheme at the CUBE (SIP): cucm1pub (10.0.0.1) ----| |---- (10.0.0.3) cube (192.168.0.2) ------ (192.168.0.1) ITSPcucm2sub (10.0.0.2) ----| The goal is:- all ...
Hi,I'm looking for an easy way to transfer (to replicate) all configuration:from the healthy and working BE6000 - CUCM, CUC and CUP, version 9to a fresh BE6000, version 10.5No need to transfer the licences. New BE6000 has been configured with differe...
Hello,I try setup the Hunt Pilot to serve incoming calls. The problem is when caller come into queue he hear:1. Initial Announcement - ok2. Not full MOH music but cycle of the first 10 seconds of music. - here is my problem!3. Periodic Announcement -...
Hi, My lobby ambassador users uses NPS (RADIUS) authentication of logon in PI 1.3. However they cannot see any changes (i.e. profile name, disclaimer, logo image etc) I've made in the local lobby ambassador user profile. This is because (I guess) the...
Hi Filippo,
Look at this document http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/command/reference/srstcr/srsa_a_m.html
"Before the alias command is configured, translation rules must be set using the translate-outgoing (voice register poo...
I thought so but i see 2 lack:1. The old system in production and I do not want to make some outage..2. I guess the DRS will transfer licenses also, I do not need any old licenses on the new system.
