Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
Imagine to connect a switch to another using two 10Gigabit links: one via single-mode fiber optics using SFP-10G-LR-S= and the other one via a SFP-H10GB-CU5M= twinax cable.
Would it be possible to bundle these two 10Gigabit links together ...
We have a CMS v2.2.8 installation with several spaces protected by PIN. The PIN input timeout is so fast that most users cannot make it in when dialing the space for the first 4 to 5 times, especially when dialing from a Webex Board. Therefore we nee...
Hi,
I'm observing the following issue on UCCX (version 10.6.1.10000-39):
UCCX has permanent Premium seats working fine;add a demo/temporary license (either additional Premium seats or Outbound IVR ports);let the demo license expire;restart the UCCX s...
Expressway-C/E pair version X8.5.2 cannot locate CMR-Cloud using SIP protocol but correctly locates it via H.323.Anyways, call goes through in SIP. Anyone with same issue?Thanks. --Filippo
Expressway-C/E pair version X8.5.2 cannot locate CMR-Cloud using SIP protocol but correctly locates it via H.323.Anyways, call goes through in SIP.Anyone with same issue?Thanks.--Filippo
Hi Rick,I'm currently facing a different behavior on a Cisco L3 switch: DHCP DISCOVER packets won't get forwarded to ip helper-address if a ip dhcp pool is present in its configuration. Could you point to a specific Cisco official documentation regar...
@fabianwickman wrote:We have a well known certificate(DigiCert) installed in our ISE-environment configured to be used as the web-auth certificate. The issue we face in the central web auth is that it is the WLC that sends it's certificate to the cli...
This bug:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvh99946
States that the passcode input timeout is 60 seconds but we are experiencing a definitely smaller timeout. I'm puzzled.
In my case the issue was caused by using the CUCM publisher as the HTTP repository for contact photos. I was using something like: http://cucm:6970/jabberphoto/%%uid%%.jpg and -- unbelievably -- it is not supported (as TAC told me). Well, the issue w...