Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi folks,
I have been trying to browse cisco feature navigator for "CDP bypass" for 802.1x feature in order to have a clear picture of which IOS versions or platforms are supporting it, but i am unable to find it in the feature list ( at least with ...
Hi Guys, Does anyone know if there is any difference in the way the following command is interpreted in different IOS release?aaa authorization exec default local group <group-name> I have observed different behaviour with the same set of configurati...
Hi Folks, I have a deployment with 3650 MC/MA that use ISE server for authentication and authorisation.We have observer since a couple of days that client on the switch turns to Idle status and eventually are unable to use the wireless network.I have...
Hi Folks, We have a setup the following solution for CMX- APs ( private network) at remote location connecting to WLC ( publicly available) throught NAT- WLC, Prime and MSE in a DMZ publicly available- APs and WLAN are configured for flexconnect loca...
Hi Folks, I am looking at a requirement for a customer requesting MIB-II. I have been looking at he MIB supported on the 3650, however i am unbale to confirm that these are MIB-II and i can't find that in the documentation.any input on this? Thanks K...
Hi Collin,
Thanks for your input. Still cannot see anywhere "CDP Bypass" mentioned. Unless another name is used on the feature navigator? attached is the result i have from the same query you posted.
Cheers
/karim
Hi Leo, Thanks for the input. Do you know of any document who can back this.I looked at older switch such as 3560 and it does appear that MIB-2 was supported.ftp://ftp.cisco.com/pub/mibs/supportlists/cat3560/cat3560-supportlist.htm any thoughts? Chee...
Hi IIyas, thanks for the input. I am a little confused With the documentation. I agree With what you just mentioned but the 1532e/I deployment guide also mention that for regulatory domain ( C,E,F,H, M,R,S) you can use PoE+ and get 3x3:3 for 2.4Ghz....
Thanks for the feedback.I did create a standalone CA copied the root CA to presence as PresenceEngine-Trust. Requested a certificate for OWA copied it to IIS enabled SSL The troubleshooter does not see any problem with the trust certificate. Howe...
