hi,we have a new POP in our MPLS network, can we have the same device for this POP, for example 7606 to be P/PE/ASBR,Also to be route reflector for other remote PE in different Cities.
we have internet router 12410 it will be used as internet gateway (runing bgp & ospf) what do recommend to use IOS or XR IOS,it will be just for internet peering with global internet service provider.regards
do you think enable IPv6 on internet router Gateway (GSR 12410 with PRP2) having full internet route table for IPv4 and also Plus IPv6 Full internet routing table.now the CPU utilization is around 50% with IPv4 if we enable the IPv6 how much do you ...
just i forget to tell you that one of the reason for using the P as RR is the utilization is not exceed 2 to 3 % also we are using the RR for just VPNv4 route not for IPv4 because we are not running internet on this mpls network just for global cust...
hi, if the P is in the path for the PE and it is RR, does not make difference for the PE because if the P down the PE out of reach ,also what model do you recommened as a dedicated RR, and if we have many countries how is the design of the RR will be...
