Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyonei have a cisco 1921 router and i want to use both Cisco HWIC-2FE and Cisco HWIC-1GE-SFP or combination ofCisco HWIC-1GE-SFP and Cisco EHWIC-1GE-SFP-CU at the same time on the router.is that possible or just can use one of this modules ...
Hello everyoneI have CUCM and CCX 11.6 .i have set Maximum Call Duration timer to 30 minutes so my agents get disconnected in 30 minutes. but when they push Hold button the timer resets and they can talk for another 30 minutes . they don't even need ...
Hello everyonei have set Maximum Call Duration timer to 30 minutes so my agents get disconnected in 30 minutes. but when they push Hold button the timer resets and they can talk for another 30 minutes . they don't even need to hold the call for a lon...
Hello
I've ordered a cisco WS-C3850-24T-S switch and after our reseller delivered device to us i noticed there is no Stackwise and Stackpower cables. could you help to make sure if this cables are included in the box or should i order them separately...
the documents are confusing it says it supports 2 HWIC module but here:https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/high-speed-wan-interface-cards/data_sheet_c78-660124.htmlandhttps://www.cisco.com/c/en/us/products/collateral/...
Thanks for the replybut in our circumstances we need a solution to disconnect Agents if they talk more than 30 minutes. so i appreciate any help to find a solution.
