Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have OTV working on our ASR1Ks in a lab environment. We mocked up two data centers and a simulated ISP core that supports multicast. Everything works fine. We can move hosts between data centers, drop a few pings and see the OTV table updates and ...
We've noticed that when removing power to the C200 M1s and then restoring power; the server doesn't automatically start. We've looked for a BIOS setting but can't seem to find it. Any pointers would be appreciated.Thanks,-chris
This past weekend we upgraded some of our boxes from 4.1.3b to 4.1.5b. We upgraded our Active and Standby CMs, our data center 7341s and two 674s at one of our remote sites.We plan to let this run for a few weeks then we'll upgrade the rest of our re...
Hey WAN OPT folks,We recently installed a WAAS solution on 4.1.3b (we are in the process of an upgrade to 4.1.5b to resolve some MAPI AO 'spillover' issues). We have two CMs, four 7341s and twelve 674s.We wanted to keep an eye on things so we started...
We are in the early stages of a proposed conversion from Autonomous to CUWN. We have experience with CUWN but have not run through such a large amount of conversions. We have roughly 600 APs (300 sites w/2 APs per site). We have tested several conver...
I wanted to share my thanks to the original poster. We ran into exactly this issue yesterday. We had the situation in an IDF/MDF. The IDF had just been upgraded and we noticed we had accidently left off Rapid PVST and forgot to set VTP mode to Transp...
Just finished a meeting with an ASR1K TME. Despite the published documentation the TME stated that VRFs are not supported in conjunction with OTV. The TME committed to getting the documentation updated.As things stand for us, we'll run OTV on the ASR...
Collin,Thanks for the reply. Looks like you found the same reference I did regarding the support of VRFs. Yes, I tried stepping through a few changes but couldn't get them to work. First I tried only the join interface in the VRF, then I added the ov...
We just ran into the same issue. We have a piece of carrier voice gear that is setting both DF and MF. We had spent hours troubleshooting WAN transport possibilities and found it to be w/in the data center on the N7K.I completely agree with you; ther...
