Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,
I'm working on a solution for a client, whereby they have two two sites, with sub ms connectivity and diverse paths (multiple dedicated fibers/wavelengths taking different physical paths through the city, diverse building entrances, etc......
Hello,
I'm trying to setup Visual VM using CUCM as the call manager but Asterisk PBX as the VM server.
I've followed these steps https://github.com/reillychase/FreePBX-Cisco-SPA-Visual-Voicemail
I'm using a CISCO 8865 to test. The question I have ...
So I have a weird one. I'm just goofing around... I'm a route and switch guy, but have recently discovered the world of telecom and collab - WOW different world...
Anyway... I have
CISCO 8865 & 3 7920 SCCP wifi phones --> CUCM --> SIP Trunk --> Aste...
Wow...ok what a poop show this has been.Some quick background. Went to do our first conversion to quad sup VSS with Cat6K's this past weekend. Failed miserably, in the end, due to some kind of hardware failure on one of the sups. Had CISCO TAC hel...
OK... a little confused, think I know what needs to happen, and what's going on, but there is some real un-certainty I'm hoping people can help out with. Here's the basic setup:A---|6500|--10G--|7604|---10G----|7604|----10G----|6500|----BYou get the...
@Florin Barhala
Here's a post I made with a similar question (before I found this post).
https://supportforums.cisco.com/t5/vpn/asa-s2s-transition-to-new-cluster-with-dynamic-nat-address/m-p/3345332#M121326
Basically, we're moving from an old clu...
Hi, thanks for the reply and suggestion. Yeah I'd already considered that, however one of the design goals is to not have to manage two separate devices/policies/configurations. Ideally the config is replicated... otherwise yes, using routing makes ...
Thought I'd reply with what ended up being the solution to the problem... although I'm not entirely sure why. I'd love it if someone were able to shed light on the why.
Also, if no one guessed, this is a LAB environment, not PROD.
Turns out that MTP ...
Thanks for getting back to me. I went through the sdl logs and verified that CUCM appears to be allocating an MTP channel when connecting to the asterisk pbx. unfortunately the show commands you suggest don't work on CUCM and asterisk doesn't seem to...
