Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Wanted to get some feedback on general practices of backing up multiple contexts on fwsm's in an enterprise / service provider environment. TFTP / FTP / Ciscoworks and/or other software available. Pro's / Con's are welcomed feedback as wellThanks
I have encountered an odd issue. I am unable to have a static routing inserted into the RIB on a router.exampleint gi0/0 ip address 10.10.1.2 255.255.255.0ip route 10.10.1.0 255.255.255.0 10.10.1.1router eigrp 2 redistribute static Notice that this ...
Can multiple fwsm context's inside interface reside on the same common IP network?I have an issue where 2 fwsm context's inside interfaces reside on the same common IP network. I am unable to pass traffic to the outside interface of one of these con...
I am wondering if there is a way to control the behavior of the master dlsw router if it fails and circuits are established on the slave dlsw router. The lab testing I have done shows that once the master dlsw router is back online, the circuits tea...
I have a PIX 7.01 that I am trying to get an application to talk across on TCP 94. Rules allow the whole IP stack. I noticed from a capture that the source port is 60003, destination port is 94. I do not see this traffic hit another upstream firew...
Yes I have different IP addresses assigned to the different context interfaces. For traffic that enters into this environment, static routing in the 6500 global routing table is handling the traffic flow to vlan 30 and vlan 40. VLAN20 is a transie...
