About DmitriyShkurko

DmitriyShkurko · 02-27-2019

Dear experts, could you please advise on the following issue I have encountered? Problem: Need to collect information about routers via SNMP: serial numbers, model names etc. How I tried to solve it: I have found the information on the Internet abo...

DmitriyShkurko · 02-18-2019

I wonder what happens if for instance someone will configure vEdge mngmt port in VPN512 as shutdown? If the device is in a "vManaged mode" how can it be unlocked? Is there any mechanism preventing the devices to be totally lost to controllers? Thanks...

DmitriyShkurko · 07-04-2018

Hello guys, I’m quite new to Prime and already have a serious project to complete. I’d appreciate your advices and hints. I have also read some topics about Prime upgrade, but still have some concerns. Objectives: Upgrade WLCs to 8.5.120.0Current Pri...

DmitriyShkurko · 07-05-2018

It seems you can't restore backups from 2.2 onto 3.2: You can restore back up only on Prime Infrastructure 3.2 from the following versions: Cisco Prime Infrastructure 3.1.6Cisco Prime Infrastructure 3.1.5Cisco Prime Infrastructure 3.1.3Cisco Prime In...

DmitriyShkurko · 03-20-2017

Peter, thank you very much again. Your responses really encourage for further learning! In my sentence your were confused by I have actually combined the two scenarios you have described above: 1. Another routing protocol takes precedence (FD=infinit...

DmitriyShkurko · 03-17-2017

Hi Peter, thank you for the brilliant explanation. Just want to point out one thing. FD=infinity. When can this be observed? When EIGRP route is not valid (other routing protocol is preferred as per better AD) and when the best new CD is NOT provided...

Member Since	‎03-17-2017 03:12 PM
Date Last Visited	‎08-19-2022 12:03 AM
Posts	6

User Statistics

User Activity

SNMP commands to collect info about serial numbers of routers

Can vEdge be totally unreachable from vSmart by making a configuration mistake?

Upgrade Prime from 2.2 to 3.2 - what would be the best approach?

Re: Upgrade Prime from 2.2 to 3.2 - what would be the best approach?

Peter, thank you very much

Hi Peter,