Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a ASA5525 9.10 set up with a default route. We tried to add a route-map to split traffic certain traffic by source IP to go out another interface.We can see the traffic getting NAT'ed properly, but we are getting "Routing failed to locate nex...
Some of our users have recently started having to log in multiple times before getting a successful connection. This is happening intermittently.
Our ACS shows the users logging in successfully each time they attempt a log in, and our ASA5520 shows m...
We can set 2.4GHz backhaul on a mesh, and it will work, but if a MAP reboots it wont reconnect.
Only way we have found to reconnect the MAP is to switch back to 5GHz backhaul.Then, after the AP reconnects, we can switch back to 2.4GHz .
It's like the...
Apparently there has been a change in the timeout for proxy.pac files probably due to a Windows update
We use a proxy.pac file that is hardcoded by AD. When our laptops are off network they experience a delay when opening a browser or anyconnect. Thi...
Update - we opened a TAC on this and it was determined to be a bug. Bug report should be coming out this week:
https://tools.cisco.com/bugsearch/bug/CSCva80688
We also found the problem only occurs when the gig port is active. Apparently, the MAP is ...
Cisco got back to me.
VLAN support and a native VLAN are needed under FlexConnect, but the boxes are greyed out there.
To set these, create a FlexConnect group, add the mesh AP. Then under "WLAN VLAN mapping" turn on VLAN Support and set the native V...
So it's sounding like a code issue.
I sent Cisco TAC my configuration the other day - haven't heard back yet.
We are trying to use 8.2.x code for the 2.4GHz backhaul feature.
We are having issues with that too - we can switch to 2.4GHz backhaul, and ...
