max_gbp777

max_gbp777 · 01-30-2015

Hi,My NCS appliance will not start as the disk is full (95%). I can login as admin but unable to log...

max_gbp777 · 10-14-2010

Hi Adam,Thanks for the reply.The phones are Cisco 7911Gs.The ip helper address is configured on the ...

max_gbp777 · 10-08-2010

I am having difficulty getting the VoIP phones to DHCP through an external DHCP server. The initial/...

max_gbp777 · 11-24-2009

Hi,We have a VoIP solution that is currently directly connection from the ISP router into our networ...

max_gbp777 · 10-07-2009

Hi Jon,thank you for your reply.Kind RegardsMax

max_gbp777 · 09-30-2009

1)_"sh vlan" Attached2) "sh vtp status" from both the 3550 and the 3750 switch which is connected to...

max_gbp777 · 09-29-2009

Hi Jon,Thank you for the reply. I have answered below:(No DHCP for this IP Range all manually config...

max_gbp777 · 09-29-2009

Hi Jon,Thank you for your reply.I have posted a reply to Kev's response which I think he has answere...

max_gbp777 · 09-29-2009

Hi Kev,I was just drawing out the network layout when I read you response. I think that you have ans...

max_gbp777 · 09-28-2009

Hi,I was just trying to simplyfy, sorry if it sounds like bits. VLAN 21 ip is 10.11.12.2 subnet: 255...

max_gbp777 · 09-28-2009

Hi, I am having problems routing on our LAN. I have configured vlan in one network and need to use o...

max_gbp777 · 09-15-2009

Hi Jclarke,Thank you for your help and advice.Kind RegardsMax

max_gbp777 · 09-15-2009

Hi Jclarke,This worked a treat! Thank you ;-)Any idea why this occured as even after I rebooted the ...

max_gbp777 · 09-14-2009

Hi Jclarke,Where do i find the IPM DOS prompt?

max_gbp777 · 09-14-2009

Hi jclarke,Attached as requested.Kind RegardsMax

NCS will not start - Free disk space is too low and server will not be started.