About maciej_wilk

maciej_wilk · 03-27-2014

Hi All, In my understanding the deployment guide does not clearly state that the Encryption key is a must, it simply states that "The TelePresence MCU has the ability to use a secure connection for communications."I don't have a valid service contrac...

maciej_wilk · 12-18-2013

Hi,I have read through the Cisco VCS and Microsoft Lync Deployment Guide for X8.1 and I have a thought which I would like to discuss.The assumption in the guide is that the VCS and Lync have different domains. And call routing is based on just that, ...

maciej_wilk · 07-30-2013

Hi everyone,I was trying to perform an update in SCU, but there is no update icon.Have you seen this behaviour?My version is 3.1(3):Kind regardsMaciej Wilk

maciej_wilk · 02-22-2013

Hi All,What is the best way to configure proper call routing to the ISDN based on the following conditions:- two ISDN gateways deployed, each in different location,- both gateways register to VCS with the same prefixes,- each gateway is in its own su...

maciej_wilk · 02-15-2013

Hi All,I have two endpoints in different local networks communicating with each other through VCS Expressway. The issue is that I have two-way video but no audio.After looking at the logs I see that one of the endpoints is communicating different por...

maciej_wilk · 09-30-2013

Hi, As far as I know, Conductor is free of charge if you have a single MCU.The question is, can you configure Conducter in such a way that the single MCU is utilised for both scheduled and adhoc conferences?Kind regardsMaciej Wilk

maciej_wilk · 08-01-2013

Server model: UCS C220 (PID UCSC-C220-M3SBE)The status of Flexflash is ok, health is degraded RAID but I assume that's normal as there is 1 SD card.Partitions are enabled, after all I boot from that partition.The newest version of SCU mounted through...

maciej_wilk · 08-01-2013

Yes, that is the goal.To use the cisco.com method you need to press the Update icon which is not there

maciej_wilk · 07-30-2013

Yes, it's running in the flexflash.I havent't tried another version, but what's the point of having flexflash if I now have to mount a downloaded ISO throught the KVM?And even if I do so, will the mounted SCU, download and apply the updates to the fl...

maciej_wilk · 07-30-2013

I'm trying to update the SCU, drivers and the HUU as stated in the user guide:http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/ucsscu/user/guide/31/gui.html#wp1082662

Member Since	‎05-17-2010 06:43 AM
Date Last Visited	‎08-18-2017 03:57 AM
Posts	91
Total Helpful Votes Received	8

User Statistics

User Activity

Conductor and MCU4501 failing due to a TLS failure on the Egress

Lync 2013 and VCS X8.1 domains

no update icon in SCU

ISDN calls routing

No audio through VCS Expressway

Re: Telepresence MCU - Port reservation vs Adhoc Conferencing

no update icon in SCU

no update icon in SCU

no update icon in SCU

no update icon in SCU