Hello,I need a Cisco Decoder that can convert Terrestrial TV to IP, does Cisco have any product that can support this, I heard that AS5100 can support this function, but I can't find any info in the datasheet.Also I can find the D9887 supports DVB-T ...
Hello, I need to know what are the features I will lose for the wireless users, if I did not use a WLC deployment (Using autonomous AP), knowing that I'm using last code of ISE1.1.1.Also in case of no WLC, can I use Inline posture node or I have to u...
one of my customers need to put 3000 MXP behind a FW and he needs to open the ports needed, is there any document list the ports used by 3000 MXP.Thanks & BRMoamen
Hello Dears,Iām somehow confused about the failover scenarios related to the uplinks and the Fabric Interconnect (FI) switches, as we have a lot of failover points either in the vNIC , FEX , FI or uplinks.I have some questions and I hope that someone...
Hello Dears,I'm new to the UCS and I have some questions concerning the HA, VN-link hardware and the dynamic vNIC policies.As I understand we use the VN-link to allow VMs on the ESX to use a direct vNIC from the UCS and it will be mapped to veth on t...
So I understand from that COA is supported on the Cisco Switch and it provides this to the wired client, while this is not supported on the AP (although it is connected after that to a switch) and we will need WLC or inline posture, but I believe tha...
Thanks Karsten for your reply, but do you have more technical details about why it is not supported, I mean what protocols or features will not run exactly.I'm not expert in wireless so I need to understand what is available in "Wired client + Cisco ...
Hello Manish,Thanks a lot for your explanation and details , it is really saved my day.Sure I would like to test all the features and scenarios to feel it, but problem that Iām still waiting for the Lab demo kit to arrive, and at the same time I have...
