Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We've a 6509 with a config without enable user.When we trie to skip the config (in rommon confreg 0x2142) in order to get a clean running config so we can copy the originate configin running and then to set the enable passord the router starts up wit...
When I trie to add an IPS device (ASA-SSM-10 version 7.0(1)E3) into my devicelist within IME 7.0.1 i'm getting the following error:Error response from IME server: - IOException: Read timed out. IME IME serveris not ressponding. Please check if it is ...
Hi,We've sites with 60 ap's and one ap is the wds-ap, when we've running ios 12.3(8)JA witch our ap1200's we've got for instance:#sh wlccp wds ..... AP Count: 59 , MN Count: 235 when we're running ios 12.3(8)JEC we're getting an AP count o...
We've got a rule in our pix that authentication for outside adresses (the internet) will be via tacacs+Our tacacs server is an acs (version 3.3) and the authentication-mechanism works.In the acs we've got an external userdatabase (active directory) a...
Hi,To solve some roaming problems with ap1210's with Ios 12.2(15)XR2 in our distribution center, Cisco has advised us toupgrade to Ios 12.3(4)JA.We have done that but after 5 days, we got complaints with associations to the ap's.A reload solve the pr...
Thanks for your reply,Allready tried CONFIG_FILE=bootflash:CCC.DDD.XXX.cfg (non-existing file in bootflash:)a rename you can't do in rommon:rommon 2 > ?alias set and display aliases commandbreak set/show/clear the breakpoi...
Thanks for your reply, I think you mean:"The router reboots. However, it ignores its saved configuration due to the fact that the configuration register is set to 0x2142.If you see that the router configuration is still present (still previous hostna...
We also had 8.0(4), today we've upgrade to 8.0(4)28 and show version shows:Cisco Adaptive Security Appliance Software Version 8.0(4)28.So interim release do show via "show version"