12-07-2007 01:43 AM - edited 07-03-2021 03:04 PM
Hi,
We've sites with 60 ap's and one ap is the wds-ap, when we've running ios 12.3(8)JA witch our ap1200's we've got for instance:
#sh wlccp wds
.....
AP Count: 59 , MN Count: 235
when we're running ios 12.3(8)JEC we're getting an AP count of 32 en the rest get the message in the log "%LEAPCL-3-TIMEOUT: AP Timed out authenticating to the WDS".
Is this made on purpose ??
Greetings,
René
01-15-2008 09:43 AM
Rene,
We encountered the same issue when we upgraded our APs from 12.3(8)JA to 12.8(8)JEC. The solution to the problem was to configure the WDS AP with the following:
wlccp wds mode wds-only
Anyway, if you have not resolved the issue please try above command. Thanks Jojo.
01-15-2008 10:26 AM
Ok,
Thanks for the reply, we've solved the problem by a change to 12.3(8)JEA3.
In that version there's a maximum of 60.
Strange that there's no documentation written about this by cisco.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide