We recently began testing VMware ESXi 5.0 on our production network. After observing some heavy discards (3-10 million at times) on the 10G uplinks FROM our core 6509s TO the Nexus 5Ks we began some investigation. We started by capturing traffic on...
Is there a way to disable the keyboard shortcuts in CUPC 8.5.5.1? For instance Alt-Ctrl-D brings up click to call and users need this keyboard shortcut for a LOB app.Thanks,Cody
If you could send me your entire configuration I can review but without some more information I won't be able to help you. If you have the ISM configured as above then it should work.
Are you able to ping from the router itself? On this deployment, I have an etherchannel from the 2921 to a 3560 switch so you will need to modify as necessary based on your topology. Here are all of the physical interface configurations..interface ...
Where are you trying to ping the ISM from?Here is the basic configuration, this was pulled from a working CUE deployment..if this does not work then you may have issues elsewhere in your network.!interface Port-channel1 description # ETHER-CHANNEL to...
ism0/0Remove service-module mgf ip default-gateway 10.1.1.40Change default gw address service-module ip default-gateway 10.1.1.40Remove the switch port access VLAN 10 and switch port mode trunk from ism0/1 and give it a try again.Sent from Cisco Tech...