06-10-2012 06:46 AM - edited 03-16-2019 11:35 AM
I am running CUE on ISM 0/0, but I am not able to ping CUE IP address, please light me what I am missing in the below configuration.
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
!
interface ISM0/0
ip unnumbered GigabitEthernet0/1.10
service-module fail-open
service-module ip address 10.1.1.41 255.255.255.0
service-module ip default-gateway 10.1.0.40
service-module mgf ip default-gateway 10.1.1.40
!
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/1.10
encapsulation dot1Q 10
ip address 10.1.1.40 255.255.255.0
!
interface GigabitEthernet0/1.20
encapsulation dot1Q 20
ip address 10.1.116.2 255.255.255.0
!
interface GigabitEthernet0/2
no ip address
duplex auto
speed auto
!
interface ISM0/1
description Internal switch interface connected to Internal Service Module
switchport access vlan 10
switchport mode trunk
no ip address
!
!
ip route 10.1.1.41 255.255.255.255 ISM0/0
!
!
int vlan 10
no ip add
06-11-2012 11:54 PM
send me output from follwoing commands
sh version
sh inventory
Dont forget to click on the rating.
06-13-2012 12:30 AM
IP-Telephony# sh ver
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M3,
EASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Tue 06-Dec-11 17:09 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
IP-Telephony uptime is 1 week, 1 day, 0 minutes
System returned to ROM by reload at 11:37:10 UTC Sun May 13 2012
System restarted at 11:39:15 UTC Sun May 13 2012
System image file is "flash0:c2900-universalk9-mz.SPA.151-4.M3.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco CISCO2911/K9 (revision 1.0) with 475136K/49152K bytes of memory.
Processor board ID FCZ1604700F
4 Gigabit Ethernet interfaces
11 Serial interfaces
2 terminal lines
1 Channelized E1/PRI port
1 Internal Services Module (ISM) with Services Ready Engine (SRE)
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
255744K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO2911/K9 FCZ1604700F
Technology Package License Information for Module:'c2900'
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security None None None
uc uck9 Permanent uck9
data None None None
Configuration register is 0x2102
IP-Telephony#
IP-Telephony#sh diag
Slot 0:
C2911 Mother board 3GE, integrated VPN and 4W Port adapter, 4 ports
Port adapter is analyzed
Port adapter insertion time 1w0d ago
EEPROM contents at hardware discovery:
PCB Serial Number : FOC15512Q7B
Hardware Revision : 1.0
Part Number : 73-11833-08
Top Assy. Part Number : 800-30797-04
Board Revision : B0
Deviation Number : 0
Fab Version : 03
Product (FRU) Number : CISCO2911/K9
Version Identifier : V05
CLEI Code : CMMBR00ARC
Processor type : C1
Chassis Serial Number : FCZ1604700F
Chassis MAC Address : c464.13f5.c7e0
MAC Address block size : 80
Manufacturing Test Data : 00 00 00 00 00 00 00 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 31 35 35 31 32 51 37 42 40
0x10: 06 18 41 01 00 82 49 2E 39 08 C0 46 03 20 00 78
0x20: 4D 04 42 42 30 88 00 00 00 00 02 03 CB 8C 43 49
0x30: 53 43 4F 32 39 31 31 2F 4B 39 89 56 30 35 20 D9
0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 42 52 30 30 41 52
0x50: 43 09 C1 C2 8B 46 43 5A 31 36 30 34 37 30 30 46
0x60: C3 06 C4 64 13 F5 C7 E0 43 00 50 C4 08 00 00 00
0x70: 00 00 00 00 00 F3 00 03 40 01 25 FF FF FF FF FF
0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Internal Power Supply information
Top Assy. Part Number : 341-0235-05
Deviation Number : 0
PCB Serial Number : AZS15360093
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Version Identifier : V03
Product (FRU) Number : PWR-2911-AC
CLEI Code :
Board Revision : A0
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 05 E5 DF 45 01 55 00 EB 05 88 00 00 00
0x10: 00 C1 8B 41 5A 53 31 35 33 36 30 30 39 33 03 00
0x20: 81 00 00 00 00 04 00 89 56 30 33 20 CB 8B 50 57
0x30: 52 2D 32 39 31 31 2D 41 43 C6 8A 00 00 00 00 00
0x40: 00 00 00 00 00 F3 00 59 41 00 BE 42 00 05 F8 00
0x50: 50 01 F4 17 2B 02 EE 1A 7A 03 E8 1B 65 04 E2 1C
0x60: 47 05 DC 1C C9 06 D6 1D A3 07 D0 1E 54 08 CA 1E
0x70: E6 09 C4 1F 5C 0A BE 1F BF 0B B8 20 12 0D AC 20
0x80: 92 0F A0 20 F0 11 94 21 38 13 88 21 6B 17 70 21
0x90: AE 1B 58 21 D3 1F 40 21 E0 23 28 21 DE 27 10 22
0xA0: 56 42 41 30 FF FF FF FF FF FF FF FF FF FF FF FF
0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
PVDM Slot 0:
16-channel (G.711) Voice/Fax PVDM3 DSP DIMM PVDM daughter card
Hardware Revision : 1.0
Part Number : 73-11576-03
Board Revision : C0
Deviation Number : 0
Fab Version : 03
PCB Serial Number : FOC154820SE
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 00
Product (FRU) Number : PVDM3-16
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 05 D8 41 01 00 82 49 2D 38 03 42 43 30
0x10: 88 00 00 00 00 02 03 C1 8B 46 4F 43 31 35 34 38
0x20: 32 30 53 45 03 00 81 00 00 00 00 04 00 09 00 CB
0x30: 8F 50 56 44 4D 33 2D 31 36 20 20 20 20 20 20 20
0x40: 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 3:
VWIC3-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1
Hardware Revision : 1.0
Top Assy. Part Number : 800-34657-01
Part Number : 73-13419-01
Board Revision : A0
Deviation Number : 0
Fab Version : 05
PCB Serial Number : FOC15476LPW
Version Identifier : V01
Product (FRU) Number : VWIC3-1MFT-T1/E1
CLEI Code : COUIA7PCAA
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 06 ED 41 01 00 C0 46 03 20 00 87 61 01
0x10: 82 49 34 6B 01 42 41 30 88 00 00 00 00 02 05 C1
0x20: 8B 46 4F 43 31 35 34 37 36 4C 50 57 89 56 30 31
0x30: 20 CB 90 56 57 49 43 33 2D 31 4D 46 54 2D 54 31
0x40: 2F 45 31 C6 8A 43 4F 55 49 41 37 50 43 41 41 03
0x50: 00 81 00 00 00 00 04 00 D9 03 40 C1 CB FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Internal Services Module (ISM) Slot 0
Internal Services Module with Services Ready Engine
Internal Services Module is analyzed
Internal Services Module insertion time 1w0d ago
EEPROM contents at hardware discovery:
PCB Serial Number : FOC16041RT7
Hardware Revision : 1.0
Part Number : 73-13417-01
Top Assy. Part Number : 800-34577-01
Deviation Number : 0
Fab Version : 04
Board Revision : A0
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
CLEI Code : IPUCAXHBAB
Product (FRU) Number : ISM-SRE-300-K9
Version Identifier : V02
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 31 36 30 34 31 52 54 37 40
0x10: 06 31 41 01 00 82 49 34 69 01 C0 46 03 20 00 87
0x20: 11 01 88 00 00 00 00 02 04 42 41 30 03 00 81 00
0x30: 00 00 00 04 00 C6 8A 49 50 55 43 41 58 48 42 41
0x40: 42 CB 8E 49 53 4D 2D 53 52 45 2D 33 30 30 2D 4B
0x50: 39 89 56 30 32 20 D9 03 40 C1 CB F3 00 06 40 05
0x60: F3 43 00 16 FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Embedded Service Engine 0/0 :
Total platform memory : 524288K bytes
Total 2nd core memory : 0K bytes
Start of physical address for 2nd core : 0x80000000
Virtual address start of 2nd core memory : 0x0 - 0x0
2nd core configured disabled
L2 cache ways for 2nd core : 0
IP-Telephony#
IP-Telephony# sh telephony-service
CONFIG (Version=8.6)
=====================
Version 8.6
Max phoneload sccp version 17
Max dspfarm sccp version 18
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_serie
s_home.html
protocol mode default
ip source-address 10.115.115.40 port 2000
ip qos dscp:
ef (the MS 6 bits, 46, in ToS, 0xB8) for media
cs3 (the MS 6 bits, 24, in ToS, 0x60) for signal
af41 (the MS 6 bits, 34, in ToS, 0x88) for video
default (the MS 6 bits, 0, in ToS, 0x0) for serviceservice directed-pickup
service dss
no auto-reg-ephone
max-ephones 50
max-dn 50
max-conferences 8 gain -6
dspfarm units 2
dspfarm transcode sessions 3
dspfarm 1 sctran
dspfarm 2 scconf
conference hardware
no privacy
no privacy-on-hold
hunt-group report delay 1 hours
Number of hunt-group configured: 1
hunt-group logout DND
max-redirect 10
voicemail 4220
cnf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line-mode single
moh music-on-hold.au
time-format 24
date-format dd-mm-yy
timezone 0 Greenwich Standard Time
secondary-dialtone 0
url services http://10.115.115.40/voiceview/common/login.do
url authentication http://10.115.115.40/CCMCIP/authenticate.asp
call-forward pattern .T
transfer-pattern .T
night-service day Sun 17:00 08:05
night-service day Mon 17:00 08:05
night-service day Tue 17:00 08:05
night-service day Wed 17:00 08:05
night-service day Thu 17:00 08:05
night-service day Fri 08:00 07:59
night-service day Sat 08:00 07:59
keepalive 30 auxiliary 30
timeout interdigit 10
timeout busy 10
timeout ringing 180
timeout transfer-recall 0
timeout ringin-callerid 8
timeout night-service-bell 12
caller-id name-only: enable
system message Diners Club
web admin system name cisco password cisco
web admin customer name Customer
edit DN through Web: enabled.
edit TIME through web: enabled.
background save interval 10 minutes
Log (table parameters):
max-size: 150
retain-timer: 15
create cnf-files version-stamp 7960 May 13 2012 13:14:02
transfer-system full-consult
transfer-digit-collect new-call
multicast moh 239.1.1.1 port 16384
route 142.1.66.254
10.115.115.40
auto assign 1 to 50
local directory service: enabled.
Extension-assigner tag-type ephone-tag.
IP-Telephony#
IP-Telephony# sh inventory
NAME: "CISCO2911/K9 chassis", DESCR: "CISCO2911/K9 chassis"
PID: CISCO2911/K9 , VID: V05 , SN: FCZ1604700F
NAME: "VWIC3-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlo
3", DESCR: "VWIC3-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1"
PID: VWIC3-1MFT-T1/E1 , VID: V01 , SN: FOC15476LPW
NAME: "PVDM3 DSP DIMM with 16 Channels on Slot 0 SubSlot 4", DESCR: "PVDM3 DSP
IMM with 16 Channels"
PID: PVDM3-16 , VID: V01 , SN: FOC154820SE
NAME: "Internal Services Module with Services Ready Engine on Slot 0", DESCR: "
nternal Services Module with Services Ready Engine"
PID: ISM-SRE-300-K9 , VID: V02 , SN: FOC16041RT7
NAME: "C2911 AC Power Supply", DESCR: "C2911 AC Power Supply"
PID: PWR-2911-AC , VID: V03 , SN: AZS15360093
06-13-2012 12:37 AM
Goto downalods page of cisco and download these files. You have to have valid CCO credentials to download.
cue-installer.sme.8.5.1
cue-vm-en_US-langpack.sme.8.5.1.prt1
cue-vm-full-k9.sme.8.5.1.prt1
cue-vm-installer-k9.sme.8.5.1.prt1
cue-vm-k9.sme.8.5.1.key
cue-vm-k9.sme.8.5.1.pkg
cue-vm-k9.sme.8.5.1.pkg.install.sre
cue-vm-k9.sme.8.5.1.pkg.install.sre.header
cue-vm-langpack.sme.8.5.1.pkg
If you find this post helpful, Click on rating!!!
06-18-2012 06:19 AM
D you have a host route to your service module address?
Sent from my iPad
06-18-2012 10:10 PM
Yes as below:
ip route 10.115.115.41 255.255.255.255 ISM0/0
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide