About tracey.marshall

tracey.marshall · 03-14-2007

I have a customer currently running CCM 4.1. They have just purchased Unified Call Manager 5.0 appliance. Does anyone know if it is possible to use DMA to get the existing database off the CCM 4.1 server and to import it onto the new appliance? Any h...

tracey.marshall · 11-08-2006

I was wondering if anyone has experienced a problem whereby a 7985 resets during a video call. This happens intermittently. The 7985 drops the call, the LCD goes blank, the red LED is on for a few seconds then it comes back. It doesn't seem to go thr...

tracey.marshall · 09-06-2006

My customer has just upgraded from ACS 3.2 to 4.0 to resolve some problems and now have a big issue that wasn't there previously. It is a well-known problem: unable to roam with Windows XP and PEAP. I believe there is a Microsoft fix but this is not ...

tracey.marshall · 04-04-2006

Does anyone know where I can find documentation on how to upgrade an WLSM?Many thanks in advance,Tracey

tracey.marshall · 02-22-2006

I have a customer with Cat6500 and WLSM running WDS. The APs and dot1x clients can authenticate with the ACS server. However, we cannot get any accounting information. We have tried configuring the WLSM with the following commands:aaa accounting netw...

tracey.marshall · 05-22-2007

Hi Rob,Thanks for the advise, most helpful as always. We have also been discussing keeping both Unity servers. If however they would like to run with a single server, I will email Cisco Licensing, as suggested.Regards,Tracey

tracey.marshall · 05-21-2007

Hi Rob,Thanks for another very helpful posting!I was wondering if you can provide some advise on my scenario. I have two companies that are merging. Both have Cisco IPT solutions. The CCM and Unity servers belonging to the smaller company will no lon...

tracey.marshall · 03-28-2007

Just a quick update. I arrived at my customer's site to discover their existing call manager is on 3.2(3). I have been working on getting this up to 4.1(3) so I can use DMA. I ran the install wizard on the new server out of curiosity and then had a p...

tracey.marshall · 03-19-2007

Thanks Rob. I have not got off to a good start. I have an MCS-7835-I2. When I power it on, I get as far as "configuring kernel parameters [ok]" and no further. I was wondering if it was something to do with the mouse and keyboard. I have tried these ...

tracey.marshall · 03-19-2007

Hi Rob,Thanks so much for helping me out again! The documentation roadmap seems to have everything I need.Many thanks, once again.Tracey

Member Since	‎05-15-2002 12:43 AM
Date Last Visited	‎09-07-2018 12:03 AM
Posts	111
Total Helpful Votes Received	5

User Statistics

User Activity

CCM 4.1 to 5.0 Upgrade

7985 Resets During Call

ACS 4.0 and Microsoft PEAP Ro

How to upgrade WLSM

AAA Accounting with WLSM

Re: unity license combine ?

Re: unity license combine ?

Re: CCM 4.1 to 5.0 Upgrade

Re: CCM 4.1 to 5.0 Upgrade

Re: CCM 4.1 to 5.0 Upgrade