Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello folks,I have had a real live setup where there was a coling problem.all cooling went down and the user did not spend mony on survaling the tempeture.The UCS chassis shut down automaticly when it was to hot and booted it self when there was cold...
Hello people,I have some 800 7921 phones I need to setup (seppret from default over the net), I have found out that I can make a config file and put on TFTP server.How do batch upload to the internal TFTP server when running 7.1 version. I dont want ...
I have many C2950-24 switches in my L2 network, and I have upgraded all of the switches to 2950-i6q4l2-mz.121-22.EA9.bin (with ssh support). Hench the network have grown the switches have been bought over time and I have many different Hardware revis...
Hello I opend a TAC SR,
It semese that when i did a HUU firmware upgrade the FPGA did not upgrade and the reson to the cache degraded state.
I have to get the HOST OS offline.
Then issue through CIMC SSH connection. Then i could boot up the OS when ...
Hello,
What was the verdict in that TAC case.
I have created a TAC case i have the same cache degrade after i replaced a defective RAID controller LSI-9271-8i. everything was working fine but then 3 hours later i get the error.
firmware 2.0(1a) UCS...
Hello Keny, Thanks for quick responce.The thing i tried to aske, in the last part was a theoretic question of what if both Interconnects fail then a failover is not enough.if you have a 90% chance of one InterConnect halt or reboot. then there would ...
Yes the CSCus83447 has been updates 3 times the last 14 days now back again to resolved status with bugfix status 2.2(3e)...So my 50 cents goes to that diasble or change ntp to an unknown IP and then reenable it again after the leap second.Is there a...
