Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,
I was playing with ISG today, and everything seems to be working, so now I decided to get rid of the CSR 1000v router in my topology and do all the fancy redirection and services right at the vWLC (running 8.0.133.0 version of code). Please ...
Hello, community.I need to pull the AP's operational status (registered, not registered), and on a PI Portal i see lets say 1000 unified APs, 900 registered and 100 not registered.To pull this kind of information via API i make a request like so:curl...
Hello, community,
i have another question. Today my question is going to be about software upgrade. We upgraded two CRS chassis with a new software (5.3.1) and after running the verification command we see some missing DLLs as follows:
RP/0/RP0/C...
Hello, community I see these strange (ungooglable) error logs on ASR-9010: RP/0/RSP1/CPU0:Aug 11 15:30:36.923 : canb-server[149]: %PLATFORM-CANB_SERVER-3-ALARM_INDICATION : Raise alarm from CBC in slot 0/FT1/SP, alarm code CBC_ALRM_SLOT_ID_CHANGED_RU...
Could anyone share an example of ISG's PBHK configuration, pretty please? i'm facing an issue when applying PBHK within the subscriber policy. Here is what i do: policy-map type service PBHK ip portbundle!policy-map type control ISG class type contro...
Thanks everyone for your output. Fixed the problem by installing the different version of software. Don't know what the problem was, but it is over now and that makes me a happy panda
Here is the output of the show inst act
RP/0/RP0/CPU0:ie#admin show install active
Tue Aug 25 18:41:25.912 FET
Secure Domain Router: Owner
Node 0/0/CPU0 [LC] [SDR: Owner]
Boot Device: lcdisk0:
Boot Image: /disk0/hfr-os-mbi-5.3.1/lc/0x5...
Thanks, AlexanderThe output of the command you mention above shows that the only FPD that need an upgrade is --------------------------------------------------------------------------------0/3/CPU0 A9K-8T-L 1.0 lc fpga1 0 ...
