Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hello I'm new to EEM scripting and I'm looking for a way to possibly change a ports VLAN if inactive for 6 weeks instead of shutting it down. I want to basically move it to a VLAN that has no L3 or no access to anything so our support guys don't wast...
Our cisco 4710 failed today and it will be replace with a new one. My question is can we take out the compact flash memory from the failed unit and put it in the replacement ACE? I attached two pictures for you to see what I'm tallking about. It look...
We are in the process of creating another data center about 15 miles from our current site. We are getting 1 Gig optimum E-line which is a Layer 2 multipoint-to-multipoint service and another 10 gig dark fiber. Both lines already supports layer 2 co...
What is the typical subnets for big wireless deployments? Right now we have 23 bits which is 255.255.254.0 510 host. We are planning bigger and thinking of going up to 2046 hosts per subnet. Do you think this is over kill? Right now we are using abou...
We just purchase the 3500i AP's and currently on testing. 4 years ago when we deployed the AP1240 dual band AP's, we tried one SSID for both bands but clients keeps on jumping back and forth between 2.4 and 5ghz. Our work around was either force the ...
FYI:
“Route base on IP hash” If the switch side is set to port channeled (VPC) If it is just multiple connection with no port channel use “originating virtual port ID”.
Please read the articles below when you get a chance.
https://kb.vmware.com...
I was able to do this by using a wav file editor. What I did was open the Origianl imAlert.wav using wav editor and the other wav file that I want to replace it with. I copied the wav forms to the orginal file and save it. It seems to work for us. A...
how long did it take you to install the patch PI_1_3_0_20-Update.4-16.tar.gz? Do you have to stop NCS or either way it will work? Its been like this for about 15 minutes. CPRIME/admin# patch install PI_1_3_0_20-Update.4-16.tar.gz ftpbkupSave the curr...
With the WLC version 7.0 you can create interface groups and have multiple vlans per WLAN. http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080b78900.shtml
I know this is an old post, I was looking for something like this a year ago and we ended up buying fat pipe which handles our 3 ISP providers inbound/outbound this is also our authorataitve DNS without the need on doing any extra work with your ISP...