Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,our company router and CME has restarted twice with bus errors at PC. Every recommendaions would be highly appreciated!------------------------------------VRTR1#show contextSystem was restarted by bus error at PC 0x422B902C, address 0x64647...
Asterisk with two different Service Providers, the user phones areSPA502g.The problem is with "subscriber phone is not swithced on or is out of network coverage" messages, received from SP when the called party in not available. Pointed automatic ans...
Hi,We are going to order two(2) cisco 4900M switches for core and twelve (12) 2960S switches for access (4 stacks with 3 switches each), connected to the core with 10G MM optical paths (up to 300M each). In addition I have one gigabit half-card but ...
From 3 days I see the following errors ( huge count, maybe 1 per second, never seen before):-------------------------------------------------------------------------------------------------Feb 17 16:46:50 192.168.1.254 803218: Feb 17 16:46:49.270: %U...
Hi, I have two 5505 asa in two offices -making dynamic nat and vpn one by another. Everything works fine.Now I have to make additional vlan (DMZ) at first asa, put there one server, and make it visible from internet but not on the public IP I already...
5. Additionally I saw another message for 5 times just before the other event appearing for the first time.========================================================================Feb 14 18:13:34 192.168.1.254 786928: Feb 14 18:13:33.701: %SEC-6-IPA...
I restarted the router and the errors completely stoped - till to this moment. I've made script on our syslog just to receive sms if the error appears even once. Meanwhile I checked the log files from the beginning of router's installation (around a ...
The version is 8.3, not 8.2..it was writing error. But I've already resolved this -1. creating object a.a.a.3,2.creating another object 10.26.1.200 (server)3. making static nat for object2 to object 14. opening outside firewall for ip traffic from...
Thanks a lot, it's working in this way with ephone-template for SCCP phones. BUT - the problem partially still exists, because one of the phones which have to be rejected from outside calls is SIP phone 3911 series and for sip phones there is no aft...
