About aijaz802

aijaz802 · 07-03-2017

Hi, I need to have POE+ (30W) on all 24 ports on Cisco 3850-24P-S. The switch by default will support 14 ports (POE+) with default 715W AC. My question is whether the switch will support POE+ on all 24 ports with dual 715W AC or 1100W AC. Does it ha...

aijaz802 · 08-21-2013

Hi,I've Cisco 7206 VXR with IOS "c7200p-advipservicesk9_li-mz.124-15.T3.bin". We have MPLS connections terminated with the VLANS on the fiber gig port. I've applied rate-limit for inbound/outgoing traffic not to exceed certain limit.But, still I'm se...

aijaz802 · 06-01-2010

Hi,One of our customers webserver is hosted with us and its behind the ASA & IPS with standard IPS configuration. I have also enabled some signatures related to IIS n DDOS. The website is constantly under DDOS attack from various IP addresses, each s...

aijaz802 · 07-15-2009

Hi,I've recently installed AIP-SSM-20 in the ASA, I need to know the following info.1. Is keeping the latest sig.def file (Sig.420) with default actions, will be sufficient for the protection?2. If I change any one signature behavior, what will happe...

aijaz802 · 03-02-2009

Hi All,I'm working for an service provider. I need to know is there any option/feature in radius thru which I can inform the NAS device to control bandwidth for a particular dsl users.Ex: The ADSL-Router(NAS) device sends the username/pwd to the acco...

aijaz802 · 07-03-2017

For 48-port switch I need POE+ on 48 all ports. I believe the 24-port SW has 435W power available with 715W supply, what about If I use 1100W power supply?

aijaz802 · 08-22-2013

Hi,Sometimes due to malware/virus activity there is lot of burst in the traffic which is recorded by the SNMP/MRTG monitors. Which is exceeding (going over 20MBPS) what is configured on the interface. Also the CPU usage was drastically increasing dur...

aijaz802 · 08-21-2013

Hi,Thanks for the response. I want to restrict both inbound and outbound, thats the reason using the CAR.The output is as below.GigabitEthernet0/2.106 xxx Company 8Mbps Input matches: all traffic params: 8384000 bps, 4192 limit, 4192 extend...

aijaz802 · 06-05-2010

Would you please elaborate on filter, I couldn't find any option in the signature to do filtering...except rules0/eventactionfilters which is not related here..

aijaz802 · 06-05-2010

Hi,Thanks for the info, I have set the per-client-embryonic-max n per-client-max to 5 with proper policy-map n class-map, but I dont know whether its in effect or not. Is there any way to see the hits for this?I have enabled all the default DDOS n w...

Member Since	‎09-11-2003 08:21 AM
Date Last Visited	‎11-30-2022 12:05 AM
Posts	153
Total Helpful Votes Received	105

User Statistics

User Activity

Cisco 3850-24P-S POE+ on all 24 ports

Cisco 7206VXR rate-limit not working

How to stop DDOS attack on Web Server

IPS Signatures Info

Control bandwidth with Radius Attribute

For 48-port switch I need POE

Cisco 7206VXR rate-limit not working

Cisco 7206VXR rate-limit not working

Re: How to stop DDOS attack on Web Server

Re: How to stop DDOS attack on Web Server