Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to establish an IPSEC tunnel with a MS Exchange server. The Unity Connection server is in FIPS mode. My IPSEC policy is using certificates to establish the tunnel. I have packet capture turned on and here is the message I received after r...
Does anyone know what Cisco recommends regarding how often the virtual machines should be replaced for Unity Connections. I know if we had physical servers it would be every 5 to 7 years, but I don't know if that is true regarding virtual servers. Th...
We have a Cisco 4451 IOS router running CUBE software. Currently we have two inbound dial peers for inbound called numbers. The first one uses URI host matching to match the DNS name from the ISP. The second one uses the user-id to match the incoming...
I have a dial peer group (DPG) that consists of 4 dial peers. The first three dial peers point to UCM server groups. The fourth dial peer is used for fax detection and sends fax calls to our E Fax server. I need to be able to stop the inbound calls f...
Thank you for your responses. I have read that in depth document, which provided me enough info to be dangerous :). Your posts have confirmed what I expected. It looks like I will need to find a new approach to solving this problem. Thanks again.
We have subscribers at three different sites with phones at each site, so when a call comes in we want the call to go to the closest subscriber, which should be the one they are registered with. So each server group consists of the primary and second...
It looks like we have this problem also. We have been losing dial tone or getting one or two rings before the call drops. I noticed that the call manager never shows the registration drops, but when I did a "debug SCCP messages" I would see registrat...
