Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I really, really need help to place my ASA 5505 between a L3 c3757 switch and a 1921 Series router.Switch: ip routing with all the Vlans interface up, the interface gi1/0/1 is configured as a trunk port to allow all the Vlans accessing the int...
Dear All,
I have a study Lab environment with a cisco ASA5510 facing the internet, the ASA is directly connected to a c3560G PoE which serve as the main switch of my LAN. I would like to integrate a UC540 device to serve my internal clients for call...
Hi All,
My study lab at home is configured with a router facing the internet, NAT translation is working fine and that router is directly connected to a catalyst switch. Now all my VMs servers and clients cannot connect to the internet unless I manua...
Dear members,
I am trying to configure the Cisco UC540 on my lab, I have connected the device to my L3 switch on vlan 10 (default vlan of the UC540) but unfortunately I can not ping the device from inside or access it via CCA from inside. It is now 2...
Dear all,I purchased a used Cisco c1861-SRST-C-F/K9 router, which all the configuration are cleared, and the password reset to default. I would like to start playing with it to gain some knowledge. Unfortunately I have been searching for videos and b...
Many thanks for your help,But another question is with the firewall in bridged mode, I will still get all the features I need from the firewall such as packets inspection, anti-bot, anti-virus, url filtering etc... Thanks,
Many thanks,
It is working now but I am still not able to Telnet or SSH to the UC540 from inside the LAN. Please what shall I unable on the device to allow remote connection.
Regards,
Ben
Hi,
Yes, I have 2 vlans on the UC540 which are VLAN 1 (default) for Data and VLAN 100 for Voice. I would much appreciate to have a link guiding me to configure the trunk port between the UC540 and the switch.
On my internal LAN I have 5 VLANs includi...
